Kvaser Leaf v3 CB

'Bare board' version of the popular Kvaser Leaf v3 The Kvaser Leaf v3 CB is the circuit board version of Kvaser's popular single-channel, high speed, USB-to-CAN bus interface, the Kvaser Leaf v3. This board boasts a timestamp precision of 50 µs and support for a wide CAN bit rate range from 20 kbit/s to 1 Mbit/s. The message rate has been boosted significantly to 20,000 msg/s.  While remaining the industry standard for reliable and low-cost CAN interfaces, the Kvaser Leaf v3 CB introduces an important feature beyond support for CAN FD. Silent mode allows this interface to be used to listen to a CAN bus without transmitting. Find out more about silent mode here. Features Tech Specs Documents Downloads Powered through the USB connector. Supports CAN FD, up to 8 Mbit/s. Quick and easy plug-and-play installation. Supports both 11-bit (CAN 2.0A) and 29-bit (CAN 2.0B active) identifiers. Supports silent mode for analasis tools – listen to the bus without interfering. 20000 msg/s, each timestamped with a resolution of 50 µs. Fully compatible with applications written for other Kvaser CAN hardware with Kvaser CANlib. Support for SocketCAN. Support simultaneous usage of multiple Kvaser interfaces. Compatible with J1939, CANopen, NMEA 2000® and DeviceNet. Higher layer protocol translation handled by the user’s application.  Property Value The information herein is subject to change without notice. Galvanic Isolation Yes Bitrate 20-1000 kbit/s Silent mode Yes Error frame generation No Error counters reading No Messages per second (send/receive) 20000 mps Temp Range -20...+70 degC Time Stamp R (µs) 50 µs Maximum message rate, send 20000 Maximum message rate, receive 20000 Sound No Current Draw max 500mA Dimensions (LxH) 100x5 mm  Datasheet Kvaser USBcan Pro 2xHS v2 CB Datasheet Kvaser USBcan Pro 2xHS v2 CB User's Guide Kvaser USBcan Pro 2xHS v2 CB User's Guide Version V3.3.220215 Kvaser SocketCAN Device Drivers Kvaser SocketCAN Drivers for Linux. Version V1.10.477 Kvaser Linux Driver and SDK Linux driver and SDK for Kvaser PCIcan/PCIcanx, Kvaser PCIcanII, Kvaser PC104+, Kvaser PCIcanx II, Kvaser USBcan II, Kvaser Memorator*, Kvaser Leaf family, Kvaser Memorator Pro**, Kvaser USBcan Pro and VirtualCAN. For LAPcan and LAPcan II, you should use version 4.2 of the driver. (*) only with USBcanII functionality, (**) only with USBcan Pro functionality Version V5.38.841 Kvaser DIADEM Driver This free driver for National Instrument's DIAdem supports all CAN hardware from Kvaser. Version V4.1.0 Kvaser Drivers for Windows Windows drivers for all our CAN hardware. Please check release notes for information on which Windows versions are supported. It also contain a driver for the virtual CAN bus. Version V5.38.841 Kvaser Firmware Update Tool Firmware Update tool for most Kvaser devices. Version V4.27.841 Kvaser Canlib Android Library Kvaser CANlib Android Library Version V1.2.0 Linux SDK Library Linux SDK library. Version V5.38.841 Python module The Canlib module is a Python wrapper for Kvaser CANlib SDK. Version V1.20.360 Kvaser LabView VI Library for CAN Library for National Instrument's LabView. Version for all Kvaser CAN hardware. Version V19.3.0 Kvaser CANlib SDK Software development kit - everything you need to develop software for the Kvaser CAN and LIN interfaces. Libraries, header files, sample programs for e.g. C, C++, C#, Visual Basic and Delphi, documentation, and more. Note: you need to download and install the appropriate device drivers separately. Version V5.38.841 Kvaser CANKing A free of charge, general-purpose CAN bus monitor. It works with all CAN interfaces from Kvaser and also with the virtual CAN bus. Version V6.21.288