Kreg Right Angle Clamp

Use this handy Right Angle Clamp when attaching face-frames to a cabinet carcass, assembling drawers, shelving and other situations where you need to join workpieces at 90 degree angles. This right angle clamp features a steel pin on one arm that fits snugly into one Pocket-Hole to clamp the pieces together as you drive a screw into an adjacent hole. Using the Right Angle Clamp is like having a helper to hold materials at a perfect 90°. Thanks to Automaxx® Auto-Adjust Technology, the Right Angle Clamp adjusts to match the material automatically with a simple squeeze of the handles. This handy clamp works with all kinds of materials, from thin 1/2" plywood to thick 2x4 boards. Clamp Using the Pocket-Hole The steel pin on one arm of the clamp is shaped to fit snuggly into a pocket hole, securely anchoring one workpiece against the other for easy assembly. Just drive a screw in an adjacent pocket hole while the right angle clamp holds the pieces for you. Swivel Pad On the arm opposite the pin, this clamp features a pad capable of swiveling to adjust to the dimensions of your material, so you can count on solid clamping without a chance of the joint shifting. Ultra Wide Reach Whether you’re joining two thin drawer sides for a cabinet, or thicker materials to frame an outdoor project, the right angle clamp opens wide to get the job done. Use Two Clamps Many woodworkers find it handy to use two Right Angle Clamps when assembling large workpieces. Place a clamp on each end to hold the wood while you drive screws in the remaining Pocket-Holes. Features Include: Holds pocket-hole joints at 90° during project assembly Automaxx® technology adjusts automatically to material thickness Contoured grips for added comfort Pin fits securely into pocket hole Swivel pad holds mating piece 5" (127mm) reach