KRAUS ISOLATED RISERS

KRAUS ISOLATED RISERS The Kraus Isolated Riser is the solution for bad handling bars. Utilizing the supplied billet bushings, the Isolated Riser is designed to be solid-mounted to the top triple tree. This creates a much more rigid bar setup, allowing for far greater use of your bike's suspension and braking capabilities. As for vibration dampening, we relocated the rubber bushings just below the handlebar and inside what we call our riser midsection. Our proprietary use of these rubber isolators drastically reduces the amount of unwanted leverage being placed on the bushings, as well as creates a much more solid bar feel, giving you greater confidence in your bike's handling. NOTE: DEPENDING ON YOUR BIKE, YOU WILL NEED TO SELECT THE CORRECT FITMENT SO THE PROPER ISOLATORS ARE INCLUDED You'll notice the difference between a hard-mounted riser leg and a relocated rubber isolator right away. Far less vibration and a much better bar feel.  Handlebar clamp is offered in either 1⅛ inch for Moto-style bars or 1 inch for standard Harley bars. The bottom clamp has an opening to accommodate hidden wiring. To make it easy, we offer ODI 1 1/8" Moto Bars here.  3.5” on center for standard OEM Harley fitment. Bushing life is increased and maintenance needs are lowered.  The wiring slot in the center of the riser body allows for easy installation and clean wiring. Our Kickback and Straight Risers are modular, meaning you can swap out just the legs should you decide to run a shorter/taller rise down the line. See the Riser Leg product page for more info.   If the risers will be used with a Kraus Raptor Pullback Plate the riser hardware will come with the Raptor Plate and you will not receive Solid Bushings with your risers