KP-60 Housing 536K01

This replacement housing (part #536K01) is an OEM-specified body shell for the KUPA KP-60 handpiece. It forms the main structural exterior of the handpiece, supporting internal components including the motor, spindle, bearings and front assembly. Features OEM-correct replacement for KP-60 handpiece bodies.  Specified external dimensions: OD ~20.44 mm (0.80″) · Length ~57.82 mm (2.27″)  Durable metal construction suitable for high-RPM, professional nail-drill environments. Allows reuse or restoration of KP-60 handpiece while maintaining compatibility with internal parts and accessories designed for that model. Installation Tips Confirm your handpiece version uses part #536K01 — older or alternate revisions may use a different housing part number. Inspect the existing housing for deformation, thread damage, dents, or worn mounting surfaces — installing a new housing onto damaged internals may not fully restore performance. Disconnect and power off the handpiece; allow it to fully stop. Remove the front nose/cap, collet/chuck and any mounting screws to access the housing. Carefully remove the old housing shell, noting orientation and how internals are mounted. Clean the internal mounting surfaces of debris, metal shavings, old lubricant or damage. Insert the new #536K01 housing, reinstall internal components (motor, bearings, spindle, front assembly) ensuring correct placement and alignment. Reassemble the front nose/collet and perform a test run: no bit installed at low speed first to verify smooth rotation and minimal vibration before full operational use.