KonFUSED Inline Fuse Holder x 3

The KNF60 uses 6 isolated ports in its patented design*. Each is then linked, fused, or left open to configure the block for your application’s demands. Utilizing three platforms to fuse or link these ports makes the KNF60 unlike any distribution block before it. Each output has room for two links or Mini-ANL fuses allowing up to 300A of protect per circuit! Each port on the KNF60 is capable of accepting 0 gauge or 4 gauge power cable depending on the fitting used. Now power for the largest installations can be easily be routed through one block! Take advantage of the patent pending isolated port design of the KNF-60 to configure three independent in line fuse holders. Perfect for competition use in events like MECA or DB Drag Racing. Multiple power wire runs from front to back of a vehicle need to be fused. Using only the lower fuse platform, the KNF-60 yields three in line fuse holders capable of loads up to 300A each. Going into the DB Drag lanes? Swap the fuses for links and eliminate the chance of a fuse blowing. Going to a MECA show? Install your Mini-ANL fuses for proper system classification. The KNF-60×31 includes four 1/0 Gauge Fittings, two 4 Gauge Fittings, and your choice of fuses (selected from the drop down menu above) *Pat No, D695698, additional Pat Pending