Kicker 48TRTP122 Amplifer and Subwoofer Bass Bundle with Install Kit

Complete* Kicker Amplifier and Subwoofer Bundles *for factory radio compatibility, please contact us about line output converters Kicker 48TRTP122 12" Sealed Downward-firing Enclosed Shallow-mount + Kicker 46CXA800.1T Amplifier + Kicker 46CXARC Bass Knob + 8 Gauge Amplifier Wiring Kit + 17 feet 2-Channel RCA Cable - Amplifier and Subwoofer Bundle Subwoofer Highlights Sealed downward-firing enclosure with one CompRT 12" subwoofer and passive radiator 3/4" medium-density fiberboard construction covered with carpet 2-ohm total impedance Power handling: 500 watts RMS (1000 watts peak power) Sensitivity: 98 dB Frequency response: 25-500 Hz Dimensions: 27.5"W x 6.125"H x 14.625"D Warranty: 1 year Subwoofer Features Woofer & Passive Radiator: The Kicker 48TRTP122 enclosure is loaded with one 12" CompRT series subwoofer. The Kicker subwoofer features a polypropylene cone with a Santoprene surround. The surround and cone are attached using Kicker's signature red double stitching, providing an outstanding bond. Along with the subwoofer, the 48TRTP122 features a 12" Kicker reFLEX passive radiator, providing extremely low bass from a compact sealed enclosure. Forced Air Cooling: Kicker uses their SoloKon technology to join the cone to the vented back brace, creating a single integrated unit. This forces air through the motor assembly allowing it to run 20% cooler and helping eliminate distortion. Down-Firing Enclosure: The sealed down-firing enclosure is made of heavy-duty MDF (Medium Density Fiberboard) with extensive internal bracing, providing exceptional acoustic efficiency and deep powerful bass. The enclosure is covered in sleek black carpeting for added protection and a refined look. Its compact, down-firing form allows it to be mounted in cargo areas, or under seats. Speaker Terminals: A single pair of spring-posts are mounted on the underside of the enclosure in a recessed terminal cup, and will accept pin connectors, single banana plugs, or bare wire up to 10 gauge. Power: The single 2Ω CompRT subwoofer can handle 250W-500W RMS (1000W peak). Break-in Period: Due to the complex nature of Kicker CompRT speakers, they require a break-in period in order to produce optimum low-bass response. The suspension system is very stiff out-of-the-box. Approximately two weeks of daily playing will allow the suspension to break-in and reach its optimum equilibrium. Once broken-in, the subwoofer will exhibit stronger bass performance, smoother response, and greater low-bass extension. Subwoofer Specifications Woofer Size 12" Speakers Per Box 1 Woofer Material IMPP Enclosure Type Passive Radiator Color Black Connector Type Spring-posts Frequency Response 20-500 Hz Power Range (Watts RMS) 500 Maximum Wattage 1000 Sensitivity 98 dB Impedance 2 Ohms Subwoofer Measurements Width 27 1/2" Height 6 1/8" Depth 14 5/8" Amplifier Highlights Mono subwoofer amplifier 300 watts RMS x 1 at 4 ohms (600 watts RMS x 1 at 2 ohms) 800 watts RMS x 1 at 1 ohm CTA-2006 compliant Class D amp technology Frequency response: 25-200 Hz Variable low-pass filter (50-200 Hz, 12 dB/octave) Fixed subsonic filter (25 Hz, 24 dB/octave) Variable bass boost (0-6 dB at 40 Hz) Amplifier Features Preamp inputs and outputs Speaker-level inputs (speaker wire to RCA adapters required) Optional remote bass level controller available 3-second delay for turn-on and turn-off Includes hardware for vertical mounting Wiring, fuse, and hardware not included with amplifier 4-gauge power and ground leads and an 80-amp fuse recommended Amplifier Specifications Amplifier Class D Low-Pass Crossover Frequency 50-200 Hz Low-Pass Slope (dB/octave) 12 dB/octave High-Pass Crossover Frequency N/A High-Pass Slope (dB/octave) N/A Bass Boost 0-6 dB Bass Boost Frequency 40 Hz Fan Cooled No Fuse Rating 80 Speaker Level Inputs RCA Preamp Outputs 1 pair 46CXARC Bass Knob Customize your bass, right from your front seat. The CXARC is a remote bass controller, compatible with select CX and PX KICKER amplifiers equipped with a REMOTE BASS jack on its end. 8AWG Amplifier Power Kit True American Wire Gauge Oxygen Free Copper for High-Current Delivery Fine Stranding and Frosted Insulation for Superior Flexibility Flux Tinned for Corrosion Resistance Double Strength Terminal for Best Power and Reliability Compact Mini-ANL Fuse Block Design This Kit Includes 18.5ft 8AWG Power Cable with 6ft Braided Sleeve and Ring Terminal. 3ft. 8AWG Ground Cable with Double Strength Terminal. 19ft Remote Turn-on Wire. (1) Mini- ANL Fuse Block. (1) 60A Mini-ANL Fuse. (1) Firewall Grommet. (2) 8GA Spade Terminals. (1) Remote Spade Terminal. (1) Remote Butt Connector. (2) Fuse Block Mounting Screws. (2) Self-Tapping Screws. (6) Cable Ties. 17 feet 2-Channel RCA Cable 17 ft RCA Cable. Coaxial construction. Flux Tinned OFC Wires. Split-tip Center Pin and Segmented Shield. Micro Barrel Design. Frosted Outer Jacket.