Kicker 48DCWR122 Amplifer and Subwoofer Bass Bundle with Install Kit

Kicker 48DCWR122 CompR 12" Dual Loaded Subwoofer in Vented Enclosure + Kicker 46CXA12001T - 1200-watt Mono Class D Subwoofer Amplifier + Kicker 46CXARC Bass Knob + 4 Gauge Amplifier Wiring Kit + 17 feet 2-Channel RCA Cable - Amplifier and Subwoofer Bundle Subwoofer Highlights Double-Stacked Magnet and Large Surround Thick, Embroidered Black Carpet Front Venting for Smooth, Powerful Bass Increased Enclosure Volume for More Output and Deeper Bass on Single 12" Model Pre-Wired, Spring-Loaded, Two-Ohm Terminals Front Venting Smooth Powerful Bass Extensive Internal Bracing and Thick MDF Construction WHAT MAKES IT SUPERIOR? -New and Improved – True Subwoofer Performance from a Thin Driver -Features Forced-Air Cooling™ - 20% Cooler for Increased Reliability -Legendary Kicker Bass in a Thin Subwoofer Subwoofer Specifications  Woofers [in, cm] 2 Woofers 12, 30 Impedance [Ohms] 2 Ohms Rec. Amp Power [watts RMS] 1000 Peak Power Handling [watts] 2000 Enclosure Depth [in, cm] 17-1/4, 43.8 Enclosure Depth [in, cm] 16, 40.6 Enclosure Depth [in, cm] 32-3/8/ 82.2   Amplifier Highlights Mono subwoofer amplifier 600 watts RMS x 1 at 4 ohms (1200 watts RMS x 1 at 2 ohms) 1200 watts RMS +/-10% x 1 at 1 ohm CTA-2006 compliant Class D amp technology Frequency response: 25-200 Hz Variable low-pass filter (50-200 Hz, 12 dB/octave) Fixed subsonic filter (25 Hz, 24 dB/octave) Variable bass boost (0-6 dB at 40 Hz) Amplifier Features Preamp inputs and outputs Speaker-level inputs (speaker wire to RCA adapters required) Optional remote bass level controller available 3-second delay for turn-on and turn-off Includes hardware for vertical mounting Wiring, fuse, and hardware not included with amplifier 4-gauge power and ground leads and a 150-amp fuse recommended Amplifier Specifications Amplifier Class D Low-Pass Crossover Frequency 50-200 Hz Low-Pass Slope (dB/octave) 12 dB/octave High-Pass Crossover Frequency N/A High-Pass Slope (dB/octave) N/A Bass Boost 0-6 dB Bass Boost Frequency 40 Hz Fan Cooled No Fuse Rating 100 Speaker Level Inputs RCA Preamp Outputs 1 pair 46CXARC Bass Knob Customize your bass, right from your front seat. The CXARC is a remote bass controller, compatible with select CX and PX KICKER amplifiers equipped with a REMOTE BASS jack on its end. M2KIT4B 4 Gauge Wiring Kit 18.5ft 4AWG Power Cable with 6ft Braided Sleeve and Ring Terminal 3ft. 4AWG Ground Cable with Double Strength Terminal 19ft Remote Turn-on Wire (1) Mini- ANL Fuse Block (1) 60A Mini-ANL Fuse (1) Firewall Grommet (2) 4GA Spade Terminals (1) Remote Spade Terminal (1) Remote Butt Connector (2) Fuse Block Mounting Screws (2) Self-Tapping Screws (6) Cable Ties 17 feet 2-Channel RCA Cable 17 ft RCA Cable. Coaxial construction. Flux Tinned OFC Wires. Split-tip Center Pin and Segmented Shield. Micro Barrel Design. Frosted Outer Jacket.