Kicker 46CWTB102 Amplifer and Subwoofer Bass Bundle with Install Kit

Kicker 46CWTB102 10-Inch Subwoofer and Passive Radiator in Weather-Proof Enclosure 2-Ohm 400W + Kicker 46CXA800.1T Amplifier + Kicker 46CXARC Bass Knob + 8 Gauge Amplifier Wiring Kit + 17 feet 2-Channel RCA Cable - Amplifier and Subwoofer Bundle Subwoofer Highlights Kicker built the 46CWTB102 tube-shaped enclosure out of tough ABS plastic that'll stand up to the stresses of car life. The tubular shape pushes bass frequencies into the air like a cannon, pumping deep, resonant sound into your vehicle and your ears. You can mount the enclosure vertically or horizontally, letting it tuck neatly into a corner of your trunk or cargo area. Spring-loaded wiring terminals make it easy to connect the wiring from your amp. Subwoofer Features Sealed enclosure with one 10" CompR subwoofer and 10" passive radiator Tube-shaped ABS plastic enclosure Vertical or horizontal mounting Mounting brackets, grilles, and hardware included Passive radiator augments bass response without port noise 2-ohm impedance Power handling: 400 watts RMS (800 watts peak) Frequency response: 25-500 Hz Sensitivity: 85.7 dB Dimensions: 10-5/8"W x 16-9/16"D Enclosure height: 10-3/4" (horizontal), 17-1/16" (vertical) Warranty: 1 year Subwoofer Specifications Enclosure Type: Reflex Driver: 10" CompR Power (RMS/Peak): 400/800 Watts Impedance: 2Ω Sensitivity (dB 1w/1m): 85.7 Dimensions: Length -  15.750", Diameter - 10.625" Amplifier Highlights Mono subwoofer amplifier 300 watts RMS x 1 at 4 ohms (600 watts RMS x 1 at 2 ohms) 800 watts RMS x 1 at 1 ohm CTA-2006 compliant Class D amp technology Frequency response: 25-200 Hz Variable low-pass filter (50-200 Hz, 12 dB/octave) Fixed subsonic filter (25 Hz, 24 dB/octave) Variable bass boost (0-6 dB at 40 Hz) Amplifier Features Preamp inputs and outputs Speaker-level inputs (speaker wire to RCA adapters required) Optional remote bass level controller available 3-second delay for turn-on and turn-off Includes hardware for vertical mounting Wiring, fuse, and hardware not included with amplifier 4-gauge power and ground leads and an 80-amp fuse recommended Amplifier Specifications Amplifier Class D Low-Pass Crossover Frequency 50-200 Hz Low-Pass Slope (dB/octave) 12 dB/octave High-Pass Crossover Frequency N/A High-Pass Slope (dB/octave) N/A Bass Boost 0-6 dB Bass Boost Frequency 40 Hz Fan Cooled No Fuse Rating 80 Speaker Level Inputs RCA Preamp Outputs 1 pair 46CXARC Bass Knob Customize your bass, right from your front seat. The CXARC is a remote bass controller, compatible with select CX and PX KICKER amplifiers equipped with a REMOTE BASS jack on its end. 8AWG Amplifier Power Kit True American Wire Gauge Oxygen Free Copper for High-Current Delivery Fine Stranding and Frosted Insulation for Superior Flexibility Flux Tinned for Corrosion Resistance Double Strength Terminal for Best Power and Reliability Compact Mini-ANL Fuse Block Design This Kit Includes 18.5ft 8AWG Power Cable with 6ft Braided Sleeve and Ring Terminal. 3ft. 8AWG Ground Cable with Double Strength Terminal. 19ft Remote Turn-on Wire. (1) Mini- ANL Fuse Block. (1) 60A Mini-ANL Fuse. (1) Firewall Grommet. (2) 8GA Spade Terminals. (1) Remote Spade Terminal. (1) Remote Butt Connector. (2) Fuse Block Mounting Screws. (2) Self-Tapping Screws. (6) Cable Ties. M117 17 feet 2-Channel RCA Cable 17 ft RCA Cable. Coaxial construction. Flux Tinned OFC Wires. Split-tip Center Pin and Segmented Shield. Micro Barrel Design. Frosted Outer Jacket.