Kicker 44L7S122 Amplifer and Subwoofer Bass Bundle with Install Kit

Complete* Kicker Amplifier and Subwoofer Bundles *for factory radio compatibility, please contact us about line output converters Kicker 44L7S122 12" Subwoofer with Dual 2-ohm Voice Coils + Kicker 46CXA800.1T Amplifier + Kicker 46CXARC Bass Knob + 8 Gauge Amplifier Wiring Kit + 17 feet 2-Channel RCA Cable - Amplifier and Subwoofer Bundle. Subwoofer Highlights 12" subwoofer with dual 2-ohm voice coils Square SoloKon™ polypropylene cone with Santoprene rubber surround Cast aluminum basket Power handling: 350-750 watts RMS Peak power: 1500 watts Frequency response: 20-100 Hz Sensitivity: 86.9 dB Mounting depth: 6-13/16" Sealed box volume: 1.25-2.0 cubic feet Ported box volume: 1.75-3.25 cu. ft. Grille not included Warranty: 1 year Subwoofer Features Dual Voice Coils: For increased system flexibility, the woofer has two 2Ω voice coils. When the voice coils are wired in parallel, the woofer presents a 1Ω load; when wired in series, the woofer presents a 4Ω load. Square Design: By making the Solo-Baric square, Kicker is giving you the most possible cone area (Sd) for a given size baffle, 16% to 20% more area than a conventional round subwoofer. More cone area means the cone moves more air, resulting in louder, deeper bass. Cone Material: The square SoloKon design is a unique one-piece construction, using injection molded polypropylene that moves as a lightweight piston, for improved control. A rear cone brace integrates into the cone with a continuous contact perimeter weld, which improves strength and resistance to deformation under pressure. Surround: The tough, flexible Santoprene rubber surround has a long-throw, positive-roll design, which controls extreme cone excursion and is tear-resistant. The corners of the surround are ribbed to ensure linear cone motion. The surround is stitched to the reinforced cone edge to improve durability. Speaker Terminals: The terminals are spring loaded and nickel plated for solid connections with speaker wire up to 10 gauge. Break-in Period: Due to the complex nature of Kicker Solo-Baric L7S woofers, they require a break-in period in order to produce optimum bass response. The high-performance suspension system makes the speakers very stiff out-of-the-box. Approximately two weeks of daily playing will allow the suspension to break-in and reach its optimum equilibrium. A broken-in subwoofer will exhibit stronger bass performance, smoother response, and greater low-bass extension. Subwoofer Specifications Size Square 12 -inch Impedance 1 ohm Cone Material SoloKon Surround Material Rubber Dual Voice Coil Yes Sensitivity 86.9 dB at 1 watt Frequency Response 20 - 100 Hz Max RMS Power Handling 750 Peak Power Handling (Watts) 1500 Top Mount Depth (inches) 6 13/16 Bottom Mount Depth (inches) N/A Cutout Diameter or Length (inches) 11 1/16 Vas (liters) 54.274 Fs (Hz) 34 Qts 0.539 Xmax (millimeters) 16.25   Amplifier Highlights Mono subwoofer amplifier 300 watts RMS x 1 at 4 ohms (600 watts RMS x 1 at 2 ohms) 800 watts RMS x 1 at 1 ohm CTA-2006 compliant Class D amp technology Frequency response: 25-200 Hz Variable low-pass filter (50-200 Hz, 12 dB/octave) Fixed subsonic filter (25 Hz, 24 dB/octave) Variable bass boost (0-6 dB at 40 Hz) Amplifier Features Preamp inputs and outputs Speaker-level inputs (speaker wire to RCA adapters required) Optional remote bass level controller available 3-second delay for turn-on and turn-off Includes hardware for vertical mounting Wiring, fuse, and hardware not included with amplifier 4-gauge power and ground leads and an 80-amp fuse recommended Amplifier Specifications Amplifier Class D Low-Pass Crossover Frequency 50-200 Hz Low-Pass Slope (dB/octave) 12 dB/octave High-Pass Crossover Frequency N/A High-Pass Slope (dB/octave) N/A Bass Boost 0-6 dB Bass Boost Frequency 40 Hz Fan Cooled No Fuse Rating 80 Speaker Level Inputs RCA Preamp Outputs 1 pair 46CXARC Bass Knob Customize your bass, right from your front seat. The CXARC is a remote bass controller, compatible with select CX and PX KICKER amplifiers equipped with a REMOTE BASS jack on its end. 8AWG Amplifier Power Kit True American Wire Gauge Oxygen Free Copper for High-Current Delivery Fine Stranding and Frosted Insulation for Superior Flexibility Flux Tinned for Corrosion Resistance Double Strength Terminal for Best Power and Reliability Compact Mini-ANL Fuse Block Design This Kit Includes 18.5ft 8AWG Power Cable with 6ft Braided Sleeve and Ring Terminal. 3ft. 8AWG Ground Cable with Double Strength Terminal. 19ft Remote Turn-on Wire. (1) Mini- ANL Fuse Block. (1) 60A Mini-ANL Fuse. (1) Firewall Grommet. (2) 8GA Spade Terminals. (1) Remote Spade Terminal. (1) Remote Butt Connector. (2) Fuse Block Mounting Screws. (2) Self-Tapping Screws. (6) Cable Ties. 17 feet 2-Channel RCA Cable 17 ft RCA Cable. Coaxial construction. Flux Tinned OFC Wires. Split-tip Center Pin and Segmented Shield. Micro Barrel Design. Frosted Outer Jacket.