KFI Kawasaki Mule 4000/4010 Winch Mount (2009+)

The KFI Kawasaki Mule 4000/4010 winch mount gives your machine a vehicle-specific way to mount a winch, so winter work and recovery jobs get done without improvised brackets. It is listed for Kawasaki Mule 4000/4010 models (2009+); check the fitment list below against your exact model and year before you order. If you are shopping for a Kawasaki Mule winch mount or Mule 4010 winch mount, this is the KFI part made for that machine. It is sold as the winch mount only, so plan the matching components listed below. Key Features Mount plate and support plate built from 1/4 in. steel Powder coated black, with the steel bead blasted before coating Standard fairlead bracket and all mounting hardware included Mini-rocker switch hardware kit included for in-dash winch control Accepts standard 4-hole, wide 4-hole and 2-hole winch patterns listed in the KFI instructions Built To Solve: Kawasaki Mule 4000/4010 Winch Mount Needs No solid factory point to bolt a winch to Getting stuck in snow, mud or a ditch with no way to self-recover Needing a winch to lift and lower a UTV plow blade Winch hardware that does not line up with the vehicle frame Best For: Kawasaki Mule 4000/4010 Owners Working Through Winter Kawasaki Mule 4000/4010 owners adding a winch for self-recovery, hauling or raising a snow plow Riders building a winter setup around the Kawasaki Mule 4000/4010 Owners who have confirmed their exact model, trim and year against the fitment list below Specifications Product type: Winch mount Brand: KFI Included: Mount plate and support plate; Standard fairlead bracket; 3/8 in and M8 mounting bolts with washers and nuts; Mini-rocker switch hardware kit Made in the USA (per the manufacturer) Manufacturer Part Number: 100845 Fitment Kawasaki Mule 4000 (2009+) Kawasaki Mule 4010 4x4 and Trans4x4 (2009+) Kawasaki Mule 4010 Diesel 4x4 (2009-2013) Installation note: The front bumper plastic is removed for install; KFI notes some wide winches need the bumper plastic trimmed on reassembly, and the rocker switch needs two switch holes and one wiring hole drilled in the dash. Fitment is taken from KFI data for this part. Fitment is not guaranteed on unlisted models, trims or years. FAQIs a winch included?No. The winch, and the roller fairlead unless stated in the included parts, are sold separately. Can I use the winch to lift a snow plow on my Kawasaki Mule 4000/4010?Yes, a winch is the common way to raise a UTV plow. Add a plow fairlead pulley so the cable runs straight and does not wear against the bumper. Which Kawasaki Mule 4000/4010 models and years does it fit?It is listed for: Kawasaki Mule 4000 (2009+); Kawasaki Mule 4010 4x4 and Trans4x4 (2009+); Kawasaki Mule 4010 Diesel 4x4 (2009-2013). Confirm your exact model and year before ordering. Is installation difficult?The part bolts on with the included hardware. The front bumper plastic is removed for install; KFI notes some wide winches need the bumper plastic trimmed on reassembly, and the rocker switch needs two switch holes and one wiring hole drilled in the dash. KFI publishes installation instructions for this part, available on this page. Do I need anything else for my Kawasaki Mule 4000/4010 winter setup?Many owners pair this with a matching snow plow, winch, windshield, roof or track system; the related products below are matched to the same machine. Why KFIKFI designs and builds winch mounts, plow mounts and UTV plow systems, and publishes installation instructions for its mounts. Complete Your Kawasaki Mule 4000/4010 Winter SetupBefore ordering this KFI winch mount, confirm your Kawasaki Mule 4000/4010 model and year against the fitment list above. Confirm your winch bolt pattern against the mount before you order, and add a roller fairlead and plow pulley if you will use the winch to lift a plow. Browse UTV track systems to keep the machine moving in deep snow. Order from Dunes 2 Dezert SXS and we will ship it to you.