Kenwood P-HD4UT Audio Kit for Select 2014-Up Harley-Davidson Motorcycles

Kenwood P-HD4UT Motorcycle Bundle for 2014-Up Harley-Davidson models includes (x2) Kenwood XM160-2 2-Channel Class D Amplifier + Kenwood XM65F 6.5" Front Facing Touring Speakers + Kenwood XM65R 6.5" Rear Facing Touring Speakers  System includes two 6-1/2" fairing speakers, two 6-1/2" rear speakers, two 2-channel amps, Road Glide mounting plate, Street Glide mounting plate, Street Glide grilles, and power, speaker, and input wiring. Designed for select 2014-up Harley-Davidson® Ultra series models with rear seat and Tour Pak. No flashing required. Amp Highlights This Bundle Includes TWO (x2) Amplifiers 2-channel motorcycle amplifier. 80 watts RMS x 2 at 2 ohms. Class D amp technology. Designed for select 2014-up Harley-Davidson motorcycles. Mounting plates for Road Glide, Street Glide, and Ultra model Harleys included. Power, speaker, and input wiring harnesses included. Speaker-level inputs compatible with factory radios and aftermarket receivers. Bypass Port provides signal for system expansion. Fuse rating: 15A x 1. Dimensions: 8.1"W x 1.62"H x 4.08"D. Warranty: 2 years. Front Speaker Highlights 6-1/2" full-range motorcycle speakers Designed for select Harley-Davidson motorcycles Injection-molded polypropylene cone 1" PEI dome tweeter Power handling up to 150 watts RMS (300 watts peak) Frequency response: 40-25,000 Hz Sensitivity: 92 dB 2-ohm impedance Grilles included Top-mount depth: 2.25" Warranty: 2 years Front Speaker Features Harley Davidson Integration: The Kenwood XM65F motorsports 6-1/2" speakers are designed for installation into select 2014-up Harley-Davidson Street Glide/Street Glide Ultra, Road Glide/Road Glide Ultra, and CVO Ultra motorcycles. The XM65F speakers mount into the factory front location using the factory mounting hardware and wiring. Replacement speaker grilles are provided. Construction: The XM65F speakers feature a 6-1/2" IMPP (Injection Molded Polypropylene) woofer cone and a coaxially-mounted 1" PEI (Poly-Ether-Imide) dome tweeter. Compatibility: The Kenwood XM65F speakers are designed to replace the factory front speakers in the following Harley-Davidson bikes Model Year Chassis Street Glide 2014-Up FLHX (with radio only or with amp installed) Limited Ultra 2014-Up FLHTK (with radio only or with amp installed) Ultra 2014-Up CVO (with factory Stage 1 amp installed) Road Glide 2015-Up FLTR (with radio only or amp installed) Limited Road Glide Ultra 2020-Up FLTRK (with radio only or amp installed) Road Glide Ultra 2016-Up FLTRU (with radio only or amp installed) Front Speaker Specifications Design 2-Way Tweeter Design Dome Impedance 2 Ohms Tweeter Composition PEI Woofer Composition IMPP Woofer Surround Rubber Sensitivity (1W at 1 meter) 92 Frequency Response 40 - 25k Hz Maximum RMS Wattage 150 Peak Power Handing (Watts) 300 Front Speaker Dimensions Top-mount Depth Inches 2 5/16 Bottom-mount Depth Inches 2 5/8 Cutout Diameter or Length Inches 5 5/8 Mounting Height Inches 0.705   Rear Speaker Highlights 6-1/2" full-range motorcycle speakers Designed for select Harley-Davidson motorcycles Injection-molded polypropylene cone 1" PEI dome tweeter Power handling up to 150 watts RMS (300 watts peak) Frequency response: 40-25,000 Hz Sensitivity: 92 dB 2-ohm impedance Grilles included Top-mount depth: 2.25" Warranty: 2 years Rear Speaker Features Harley Davidson Integration: The Kenwood XM65F motorsports 6-1/2" speakers are designed for installation into select 2014-up Harley-Davidson Street Glide/Street Glide Ultra, Road Glide/Road Glide Ultra, and CVO Ultra motorcycles. The XM65F speakers mount into the factory front location using the factory mounting hardware and wiring. Replacement speaker grilles are provided. Construction: The XM65F speakers feature a 6-1/2" IMPP (Injection Molded Polypropylene) woofer cone and a coaxially-mounted 1" PEI (Poly-Ether-Imide) dome tweeter. Compatibility: The Kenwood XM65F speakers are designed to replace the factory front speakers in the following Harley-Davidson bikes Model Year Chassis Street Glide 2014-Up FLHX (with radio only or with amp installed) Limited Ultra 2014-Up FLHTK (with radio only or with amp installed) Ultra 2014-Up CVO (with factory Stage 1 amp installed) Road Glide 2015-Up FLTR (with radio only or amp installed) Limited Road Glide Ultra 2020-Up FLTRK (with radio only or amp installed) Road Glide Ultra 2016-Up FLTRU (with radio only or amp installed) Rear Speaker Specifications Design 2-Way Tweeter Design Dome Impedance 2 Ohms Tweeter Composition PEI Woofer Composition IMPP Woofer Surround Rubber Sensitivity (1W at 1 meter) 92 Frequency Response 40 - 25k Hz Maximum RMS Wattage 150 Peak Power Handing (Watts) 300 Rear Speaker Dimensions Top-mount Depth Inches 2 5/16 Bottom-mount Depth Inches 2 5/8 Cutout Diameter or Length Inches 5 5/8 Mounting Height Inches 0.705