Keim Interior Mineral Wall Paint

Keim Interior Mineral Wall Paint Keim Interior Mineral Wall Paint paint contains no plastic, VOCs, or toxins. Colors created with raw, authentic, artist-grade mineral pigments Hand crafted luxury paint, good for you, good for our world.  Keim Interior Mineral Wall Paints are guaranteed safe, non-toxic and meet the highest EPA standards. GreenGuard Gold certified. Keim mineral paints are tested for over 10,000 chemicals and exceed chemical emission standards which contributes to cleaner indoor air quality for you and your family.  Hand-crafted quality Pure mineral ingredients for the healthiest finish Mineral paint colors radiate & interact uniquely with light Mineral paint is breathable for a hygienic finish Mineral pH naturally resists mold and mildew growth Certified pure and clean—UL Greenguard Gold Certified Safe and healthy to use Mineral Wall Paint is naturally flame resistant Zero VOC & low to no odor Use on new or previously painted drywall, plaster, brick, stone, concrete or stucco Self-priming on most surfaces 5 X 11” paint swatches available Keim Interior Mineral Paint USE ON: Use on interior walls and ceilings of masonry, brick, stucco, drywall and plaster.  Self-priming on both bare and previously painted surfaces.  Not for use on wood trim, doors, windows or floors.  COVERAGE: 2 coats of Mineral Wall Paint are recommended for best appearance and durability. Coverage will vary depending on the type of surface, porosity and texture as well as application methods, equipment and workmanship.  Quart           55—70 square feet Gallon          250—300 square feet 4 Gallon        1000—1200 square feet APPLICATION: You will need an extra bucket, painter’s tape, drop cloths a paint roller with a 3/8” or ½” cover, paint brush, stir stick, paint tray and liner, ladder, if necessary, dampened cloth to clean up spatters, latex gloves and eye protection. Previously painted surfaces should be clean and free of loose or peeling paint, dirt, grease, mold and mildew or other household grime and the surface should by dry.  New drywall and plaster should be sanded smooth with all dust removed.  One coat of Mineral Primer is recommended on new drywall to even-out the absorption and improve appearance of Mineral Paint. Mix Keim Interior Mineral Wall Paint thoroughly until homogenous and no color streaks remain.  Do not thin paint, it is supplied ready-to-apply.  If you are using multiple buckets of the same color it is recommended to “box” colors by mixing multiple buckets into larger bucket to ensure a more uniform color.  Never stop painting in the middle of a wall, but paint from corner to corner.  Keim Interior Mineral Wall Paint dries rapidly so work quickly to maintain a wet edge.  If an edge dries out before you can continue, you may use a mister bottle with water to dampen the dry edge and continue applying paint.  Cut-in with a wall brush and avoid heavy edges or brush marks.  Only cut-in what you can paint within 30 minutes.  Cutting in the entire room may lead to visible “seams”.  While cut-in paint is fresh, use a 3/8—1/2” nap synthetic roller to roll into a damp cut-in for best results.  Apply to cover uniformly without runs or sags.  Work from top to bottom and corner to corner. This also helps to even out excess paint build-up from overlapping roller patterns.  Allow to dry 2—4 hours before re-coating. Reapply a second coat as above, for best appearance and durability.  Allow to dry overnight. Avoid drips, spills and painting adjacent areas.  Clean up spills of Keim Interior Mineral Wall Paint immediately with a damp cloth as it will be difficult to remove once dried. Clean tools with soap and warm water. DRY TIME Dry to touch:  1—2 hours at 70°F and 50% R.H.  Recoat:  2—4 hours     BROCHURE TDS