Katool 3D Wheel Alignment Machine Wheel Aligner--AV533

Item description from the seller Matters needing attention The operator of the instrument must pass the training of the company, and can operate after passing the training. The operator must have some basic knowledge of computer application. The operator must understand the basic knowledge of four-wheel positioning. Check whether the power connection line contact is reliable, whether there is damage. If the power supply voltage is unstable, please equip your own AC regulator. Check whether the car lift is firm and level regularly to ensure the correct test and the safety of personnel. Remove obstacles around the car lift so as not to affect the operation. Check all loose bolts and parts at the end of service and tighten them up for safety.Four-wheel locator can not be placed on a vibrating object or tilted, should avoid direct sunlight or humidity. Four-wheel locator belongs to precision testing equipment, there are sensitive components, in the process of use should be taken gently, do not throw random, otherwise light will lead to shell deformation, heavy will lead to internal components failure, affect the normal use. Avoid splashing liquid on the surface of the four-wheel locator, lest liquid enter the system and cause permanent damage. After use, please cut off all power supplies. Four-wheel locator is tested through the method of image, do not let the strong light to the sensor interference, and should avoid the object between the sensor blocking the light. Excerpt parameters: Measurement parameters, range and accuracy 1 Total front beam Angle Measuring range: ± 6 °. Accuracy: ± 4' in ± 2 ° range, ± 10' in other ranges. 2. Front beam Angle of single wheel Measuring range: ± 3 °. Accuracy: ± 2' in ± 2 ° range, ± 5' in other ranges. 3. Wheel camber Measuring range: ± 10 °. Accuracy: ± 2' in ± 4 ° range, ± 10' in other ranges. 4 kingpin rear Angle Measuring range: ± 15 °. Accuracy: ± 2' in the range of ± 12 °, ± 10' in other ranges. 5 kingpin incliner Measuring range: ± 20 °. Accuracy: ± 6' in range of 0 ° -- +18 °, ± 10' in other ranges. 12 6 thrust Angle Measuring range: ± 6 °. Accuracy: ± 2' in ± 2 ° range, ± 10' in other ranges. 7 axis Angle Measuring range: ± 6 °. Accuracy: ± 2' in ± 2 ° range, ± 10' in other ranges. 8 Indicates value requirements 8.1 Display value resolution The angular resolution is 1', where the forward beam value is 1' in Angle or 0.1mm in mm. 8.2 Zero drift Zero drift is not greater than 4' within 30min. 8.3 Indicating value error The value error is ± 4'. 8.4 Indicate value stability The indicated stability is ± 2' within 10s. Power Supply Working Temperature Matters needing attention The operator of the instrument must pass the training of the company, and can operate after passing the training. The operator must have some basic knowledge of computer application. The operator must understand the basic knowledge of four-wheel positioning. Check whether the power connection line contact is reliable, whether there is damage. If the power supply voltage is unstable, please equip your own AC regulator. Check whether the car lift is firm and level regularly to ensure the correct test and the safety of personnel. Remove obstacles around the car lift so as not to affect the operation. Check all loose bolts and parts at the end of service and tighten them up for safety.Four-wheel locator can not be placed on a vibrating object or tilted, should avoid direct sunlight or humidity. Four-wheel locator belongs to precision testing equipment, there are sensitive components, in the process of use should be taken gently, do not throw random, otherwise light will lead to shell deformation, heavy will lead to internal components failure, affect the normal use. Avoid splashing liquid on the surface of the four-wheel locator, lest liquid enter the system and cause permanent damage. After use, please cut off all power supplies. Four-wheel locator is tested through the method of image, do not let the strong light to the sensor interference, and should avoid the object between the sensor blocking the light. Excerpt parameters: Measurement parameters, range and accuracy 1 Total front beam Angle Measuring range: ± 6 °. Accuracy: ± 4' in ± 2 ° range, ± 10' in other ranges. 2. Front beam Angle of single wheel Measuring range: ± 3 °. Accuracy: ± 2' in ± 2 ° range, ± 5' in other ranges. 3. Wheel camber Measuring range: ± 10 °. Accuracy: ± 2' in ± 4 ° range, ± 10' in other ranges. 4 kingpin rear Angle Measuring range: ± 15 °. Accuracy: ± 2' in the range of ± 12 °, ± 10' in other ranges. 5 kingpin incliner Measuring range: ± 20 °. Accuracy: ± 6' in range of 0 ° -- +18 °, ± 10' in other ranges. 12 6 thrust Angle Measuring range: ± 6 °. Accuracy: ± 2' in ± 2 ° range, ± 10' in other ranges. 7 axis Angle Measuring range: ± 6 °. Accuracy: ± 2' in ± 2 ° range, ± 10' in other ranges. 8 Indicates value requirements 8.1 Display value resolution The angular resolution is 1', where the forward beam value is 1' in Angle or 0.1mm in mm. 8.2 Zero drift Zero drift is not greater than 4' within 30min. 8.3 Indicating value error The value error is ± 4'. 8.4 Indicate value stability The indicated stability is ± 2' within 10s. Power Supply Working Temperature