Kasco 2400 Replacement Motor 1/2 HP

Kasco Replacement Motors Kasco 2400 Replacement Motor 1/2 HP A genuine Kasco 1/2 HP replacement motor for 2400-series surface aerators, circulators, and VFX aerating fountains — ships assembled with propeller and ready to install. ✓ Free Shipping ✓ 2-Year Warranty ✓ Genuine Kasco Motor ✓ 888-825-6214 What's Included Genuine Kasco 2400 motor, factory new Propeller pre-assembled to motor Protective wire cage or clog-resistant cage (model dependent) Stub cord with quick-disconnect, or full-length power cord Save by Replacing Just the Motor Your float, mounting accessories, control panel, and power cord (if it has a quick disconnect) can all be reused — there's no need to replace the whole unit when only the motor has failed. Before ordering, check the condition of your existing cord if you plan to reuse it. Key Features ⚙️ Oil-Cooled, Continuous Duty Rated for continuous operation with 17mm top and bottom bearings for long service life. 🌊 Salt-Water Compatible Corrosion-resistant construction suitable for salt water and other harsh environments. 🛡️ Thermal Overload Protection Guards against overheating and damage from excessive, prolonged current draw. 🔒 Heavy-Duty Mechanical Seal Fully unitized carbon ceramic seal built for reliable long-term submersion. ✅ Rigorously Tested Every motor undergoes run testing before it leaves the factory to confirm reliable operation. 🏆 2-Year Warranty Backed by Kasco's full manufacturer's warranty. Get Mine Now → Choosing Your Model Model Replaces 2400A 2400A & 2400AF Surface Aerators — ships with propeller & protective wire cage 2400C 2400CF, 2400CUD, 2400CID Circulators — ships with propeller & clog-resistant cage 2400VFX 2400VFX Aerating Fountain — ships with VFX propeller & required components Available Configurations Model Cord Price 2400A Quick Disconnect w/ Stub Cord (included) $1,092.00 2400A 50 Feet $1,094.00 2400A 100 Feet $1,292.00 2400A 150 Feet $1,780.00 2400A 200 Feet $1,960.00 2400C Quick Disconnect w/ Stub Cord (included) $1,192.00 2400C 50 Feet $1,194.00 2400C 100 Feet $1,392.00 2400C 150 Feet $1,880.00 2400C 200 Feet $2,060.00 2400VFX Quick Disconnect w/ Stub Cord (included) $1,257.00 2400VFX 50 Feet $1,260.00 2400VFX 100 Feet $1,487.00 2400VFX 150 Feet $1,943.00 2400VFX 200 Feet $2,121.00 Technical Specifications Spec Value Horsepower 1/2 HP Voltage 120V, Single Phase Speed 1,750 RPM Running Amps 5.0 Cooling Oil-Cooled, Continuous Duty Rated Bearings 17mm Top & Bottom Seal Unitized Heavy-Duty Carbon Ceramic Mechanical Seal Protection Thermal Overload Protection Daily Operating Cost (24/7) ~$1.58* Warranty 2 Years *Estimated cost based on average electricity rates; actual cost varies by location. Frequently Asked Questions Which model do I need? It depends on your equipment: 2400A for surface aerators, 2400C for circulators, and 2400VFX for aerating fountains. Check your unit's model plate if you're unsure, or call us. Do I need to replace the whole unit, or just the motor? In most cases just the motor — your float, mounting accessories, control panel, and power cord (if it has a quick disconnect) can all be reused. Does this come with a propeller? Yes — each motor ships fully assembled with the correct propeller and protective cage for your model. Is this suitable for salt water? Yes — the motor's corrosion-resistant design makes it suitable for salt water and other corrosive environments. What's the warranty? This motor is backed by Kasco's full 2-year manufacturer's warranty. Questions? Our pond experts are ready to help. Call or email us — we'll help you confirm which model fits your Kasco equipment. 📞 888-825-6214 Get Mine Now →