Kapton Alternative KPT-1 (Adhesive Tape Products)

Kapton Alternative KPT-1 1 mil electrical grade Kapton alternative polyimide film coated with a high performance silicone adhesive. Thin and conformable, with outstanding tear and abrasion resistance at elevated temperatures. Adhesive will thermoset to increase adhesion values. Leaves minimal residue when removed after manufacturing process; reduces clean-up time and minimizes rejects. Permits observation of board during processing. Excellent resistance to to acids, oils, solvents, aging, staining, water immersion. Protects gold contacts from molten solder during hot air wave solder leveling process. Film meets UL510. Formulated to meet spec: MIL-P-46112B.   Technical Data: Film thickness 1.0 mil Total thickness 2.6 mil Tensile strength 21 lbs/in Break strength 30 lbs/in Adhesion 23 oz/inch width Elongation >40% Temperature resistance 392F (200C) Dielectric strength 6500 v   Kapton Alternative KPT-1 Tech Data Sheet         Additional Information   Nominal Tape Widths vs Actual Widths Tape rolls are cut to standard tape industry metric widths of approx. 24mm per 1-inch of nominal width ordered. As a result ACTUAL tape widths are normally 5% narrower than the NOMINAL width shown in inches. Examples: 1" Nominal width = 15/16" (24mm) Actual width 2" Nominal width = 1-7/8" (48mm) Actual width 3" Nominal width = 2-13/16" (72mm) Actual width Note that tape rolls are NOT guaranteed to be splice-free.