Kukko K-70-C PULLPO Ball Bearing Puller (10mm - 100mm ID)

Highlights: Made In Germany. This set is a combination of the K-70-A and K-70-B sets. PULLPO: The special cross-beam shape enables safe and easy mounting and automatic clamping of the jaws via leverage transmission. The Kukko K-70-C PULLPO ball bearing puller combines the capabilities of the K-70-A and K-70-B sets, offering a versatile solution for removing deep groove ball bearings without disassembling the shaft. Made in Germany, this ball bearing puller tool features a specialized cross-beam design that ensures secure mounting while automatically clamping the jaws via leverage transmission. It is ideal for extracting bearings that are seated on both a shaft and in a casing, allowing for efficient and damage-free removal. This deep groove ball bearing puller includes specially developed pulling jaws that provide optimal support and extension force. The tempered two-part jaws are reinforced with a hammered dowel pin for stability, while color-coded versions simplify selection. Machined lateral surfaces ensure precise jaw alignment with the cross-beam, and integrated magnets make positioning support rings easier. It features a mechanical pressure spindle with a milled thread and special coating for enhanced durability. The rounded spindle head is compatible with a slide hammer for non-contact removal, expanding its range of applications. Designed for broad compatibility, the Kukko K-70-C PULLPO supports ISO ball bearings 6000-6020, 6200-6212, 6300-6311, and 6403-6408, accommodating inner diameters from 10 mm to 100 mm and outer diameters from 26 mm to 150 mm. It includes multiple counter-pressure pads for enhanced support and comes securely stored in custom foam for organization and protection. The Kukko K-70-C PULLPO Ball Bearing Puller is a dependable tool built for professional bearing extraction. Features: With this puller, grooved ball bearings that are simultaneously located on a shaft and in a casing can be quickly and easily removed. Puller is self-tensioning and easy to handle. Pulling jaws specifically developed for precise mounting in bearing tracks for optimal support and better extension force. Pulling jaws made of two parts. Dowel pin is hammered into the upper end of the jaw. The proven KUKKO claw in a newly developed, modern jaw design. The two pulling jaw versions are color-coded for easier distinction. The pulling jaws are tempered for a long service life. The special cross-beam design ensures secure retention of the the part to be removed by the pulling jaws thanks to the spread adjuster. Mechanical pressure spindle. Rounded spindle head is used with the slide hammer as a spindle top. Milled thread treated with special coating. Instructions and conversion table in the cover. Secure storage in special foam. Kukko Advantage: Puller is self-tensioning and easy to handle. Simple, self-explanatory use with a small number of individual components. Simple mounting of the pulling jaws with 90° rotation in the cross-beam. Secure, form-fitting connection of the pulling jaws with the cross-beam. Only two pulling jaw types required. Machined, lateral jaw surfaces ensure optimal jaw alignment with the cross-beam. Magnets under the cross-beam ensure simple mounting of the support rings on the ball bearing. Spindle head band prevents the wrench from slipping off. Non-contact removal possible - in combination with a slide hammer. Specs: Ball bearing ISO: 6000-6020; 6200-6212; 6300-6311; 6403-6408 Inner diameter of ball bearing: 10 - 100 mm (3/8 - 3 7/8 inch) Outer diameter of ball bearing: 26 - 150 mm (1 1/32 - 5 7/8 inch) Hexagon drive (male): 13; 17 mm K-70 jaw length: 70; 156 mm (2 3/4; 6 3/16 inch) Number of rings: 13 St. / pcs. Number of jaws: 14 Diameter of support ring: 19 - 77,5 mm (3/4 - 3 1/16 inch) Counter-pressure pad for extraction of ball bearing with hollow shaft: 10 - 42 mm (3/8 - 1 5/8 inch) Number of counter-pressure pads: 4 St. / pcs. Diameter of counter-pressure pads: 35 - 80 mm (1 3/8 - 3 3/16 inch) Weight 7.125 kg What's included: (SKU and Item Name) 70-01-T Cross-beam 70-02-T Cross-beam 70-011 3 narrow replacement jaws without rings 70-012 3 wide replacement jaws without rings 70-021 4 narrow replacement jaws without rings 70-022 4 wide replacement jaws without rings 610120 Spindle 614242 Spindle 70-01-R Complete ring set 70-02-R Complete ring set 700117 Small pressure pads 700217 Large pressure pads 70-021-S 4 narrow replacement jaws with rings (red) Videos: K-70-C Ball Bearing Puller Set - Unboxing and Usage Downloads: Download the Kukko K-70-C data sheet here.