Junior Single Cut Guitar Kit with Bolt-On Neck, Chrome Hardware

Perfect for beginners, this Junior single cut DIY guitar kit offers a straightforward build process with minimal complexity. The bolt on mahogany neck, pre routed solid body, and simple single pickup design make it an excellent entry point for learning guitar assembly and finishing. Full Specifications General Dexterity: Right-Handed Number of Strings: 6 Size: Full Size Build Difficulty: Beginner (3/10) Fixed bridge with pre-drilled mounting keeps intonation setup simple Bolt-on neck joint bolts straight on, so there is no gluing or clamping to get right Mahogany has open grain that needs filling before finishing for a smooth result Body Material: Mahogany (2-4 pcs) Type: Solid Cutaway: Single Binding: None Top Veneer: None Neck Material: Mahogany Joint: Bolt-on Profile: C-shaped Truss Rod: Two-Way, Adjustable Scale Length: 628mm / 24.75″ Binding: None Fretboard Material: Rosewood Radius: 14" / 356mm Number of Frets: 22 Fret Wire: Stainless Steel Fret Size: Medium Jumbo Inlay Shape: Block Inlay Material: White Plastic Headstock Shape: Standard (as in product images) Binding: None Nut: Ivory Plastic (ABS) Nut Width: 42 mm Electronics Neck Pickup: None Bridge Pickup: P90 Controls: 1 Volume (wiring diagram) Wiring: DIY (soldering required) Wiring Diagram: P90, 1 Volume Only Output Jack: Side jack Pickups: Bridge Standard Humbucker Hardware Bridge: Wraparound Tuners: Closed Pickguard: None Knobs: Gold Cavity Covers: Black Strings: Steel Finish: Chrome (or Black) What's in the Box Single-cutaway guitar body (unfinished) Bolt-on guitar neck with dark fretboard and white rectangular block inlays 6x chrome sealed tuners with bushings, washers and mounting screws Chrome-covered humbucker pickup in a ivory mounting ring Chrome wrap-around bridge with intonation screws 2x chrome bridge posts Potentiometer with pre-soldered red and black wires, nut and washer Gold bell knob Output jack with cupped mounting plate Black triangular jack plate with screws Round black cavity cover Chrome neck plate with 4 mounting screws 2x chrome strap buttons with washers and screws Set of guitar strings Black instrument cable with angled plug Allen wrench Assorted mounting screws What You'll Need You will need to solder the electronics. Depending on the finish you choose, the tools below cover a standard build. For assembly: Phillips screwdriver, Allen wrench set For wiring: Soldering iron, solder, wire cutters For finishing: Sandpaper (220-600 grit), wood grain filler, primer, paint or stain, clear coat For setup: String winder, guitar tuner, Allen wrench for truss rod and saddle height adjustment No woodworking or routing required - all cavities, holes, and channels are pre-cut.