Blank Junior Guitar Kit with Mahogany Body and Rosewood Fretboard

Build a guitar with soul and character using our Junior LP-style Blank Guitar Kit. Designed for DIY builders who want creative freedom, this slab-body mahogany kit comes with a blank headstock and an unfinished surface so you can carve, sand, paint, and finish it exactly the way you imagine. Classic Junior tone meets complete customization control. Full Specifications General Dexterity: Right-Handed Number of Strings: 6 Size: Full Size Build Difficulty: Advanced (8/10) Single-pickup wiring is about as simple as electronics get, but the blank headstock ships undrilled and unshaped, so you cut the outline and drill the tuner holes yourself Mahogany has open grain that needs filling before finishing for a smooth result Carved top needs patient sanding, since the arch is easy to flatten or sand through Body Material: Mahogany Type: Solid Cutaway: Single Binding: None Top Veneer: None Neck Material: Mahogany Joint: Bolt-on Profile: C-shaped Truss Rod: Two-Way, Adjustable Scale Length: 628 mm / 24.75" Binding: None Fretboard Material: Rosewood Radius: 14" / 356mm Number of Frets: 22 Fret Wire: Stainless Steel Fret Size: Medium Jumbo Inlay Shape: Trapezoid Inlay Material: Pearl White Headstock Shape: Blank (Not Drilled) Binding: None Nut: White Plastic Electronics Neck Pickup: None Bridge Pickup: Humbucker Controls: 1 Volume, 1 Tone Wiring: DIY (soldering required) Wiring Diagram: Single Humbucker, 1 Volume, 1 Tone Output Jack: Not pre-drilled (builder drills to suit the body shape) Hardware Bridge: Tune-O-Matic w/ stopbar Tuners: Closed Pickguard: Ivory Knobs: Black Cavity Covers: Black Strings: Steel Finish: Chrome What's in the Box Rectangular mahogany body blank, uncut, with a neck pocket, one pickup route, control holes and a rear control cavity Neck with dark fretboard, frets, pearl block inlays and an uncut paddle headstock 6x chrome sealed tuners with bushings and washers Black covered humbucker pickup with black mounting ring Wiring harness with pot and coloured wiring Toggle switch with black tip Chrome square jack plate with output jack Tune-o-matic bridge with six saddles Chrome stop bar tailpiece 4x posts and thumbwheels for bridge and tailpiece 2x black dome knobs Ivory pickguard Black truss rod cover Black oval rear cavity cover Black neck plate with four neck screws 2x strap buttons Allen wrench Coiled set of strings Assorted mounting screws, nuts and washers Guitar cable What You'll Need You will need to solder the electronics. Depending on the finish you choose, the tools below cover a standard build. For assembly: Phillips screwdriver, Allen wrench set For wiring: Soldering iron, solder, wire cutters For finishing: Sandpaper (220-600 grit), wood grain filler, primer, paint or stain, clear coat For setup: String winder, guitar tuner, Allen wrench for truss rod and saddle height adjustment No woodworking or routing required - all cavities, holes, and channels are pre-cut.