JUMBO CRAYON TISSUE BOX 3MF FILE

3MF ONLY. TESTED WITH PUFFS AND THE DOLLAR TREE KLEENEX PLEASE KNOW HOW TO WORK WITH 3D FILES. IM NOT RESPONSIBLE FOR ANY FAILED PRINTS ETC. I TESTED THIS FILE MULTIPLE TIME BEFORE PRINTING AND MY SETTINGS WORKED FOR ME. BASE AROUND 9 HOURS , TOP 3, DECAL 40MINS  BASE FITS INTO TOP. INDENTATION ON THE BASE TO FIT THE LOGO. OR YOU CAN PRINT THE ONE WITHOUT THE INDENT For the best results and fit, I also recommend using the settings included in my 3MF file. These are the settings used during testing and are the settings I designed the file around. 😊 I also recommend not changing the size unless you know how to do it without messing up. Recommended Printing Method: I recommend printing the base first before printing the top. Once the base is finished, print the tip   Another option is to duplicate one of the top pieces and use the Cut tool in your slicer to trim it down into a small test ring that fits around the base. This allows you to quickly test which fit works best with your printer and filament before committing to a full top print, saving both time and material. Once you’ve found the best fit, print the complete top with confidence. You may use this file for personal use and to create physical products for sale (such as cheer sticks or other finished physical items). You may not resell, share, trade, copy, gift, or distribute the digital file in any form. You may not claim this design as your own. All rights remain with the original creator. Please note: I do not provide support for 3D printer setup, slicer configurations, machine troubleshooting, or print failures. Print quality and final results will vary based on your printer model, nozzle size, filament, print settings, and environmental conditions. AMS units were used for all test prints.