Jubilee Cable-Driven Toolchanger Hardware-only kit V2.1

All the parts you need for the Jubilee Toolchanger with provisions for mounting up to 6 tools Looking for V1? Contact me Luke@Lukeslab.online and I’ll help you get what you need. Assembly Instructions <-Here   Each Kit Contains: Specialty QTY Twist Lock Shaft Assembly 1 REL Spring 1 Spring Guide, 600mm 2 Wire Rope, 1600mm 1 Wire Lug 2 Fasteners QTY M3 Square Nut 2 M5 Locking T-nut 2 M2 Screw, 10mm long 3 M3 Buttonhead Screw, 6mm long 7 M3 Buttonhead Screw, 8mm long 13 M3 Buttonhead Screw, 10mm long 8 M3 Buttonhead Screw, 12mm long 4 M3 Buttonhead Screw, 16mm long 1 M3 Set Screw, 8mm long 3 M5 Buttonhead Screw, 14mm long 2 Other Hardware QTY REL Hub 1 M3 Washer 2 M4 Dowel Pin, 20mm long 6 M3 Tapered Heat Set Insert 13 Sleeve Bearing, 6mm ID, 9mm OD, 10mm length 1 M6 Shim, 0.2mm thick 1 M5 Shim, 0.2mm thick 3 Electrical QTY Planetary Stepper (optional) 1 Mechanical Limit Switch 2 Dust Proof Limit Switch 2   Parts Contained in Each Tool Kit Item QTY M5x60 Dowel Rod 2 M3x6 Buttonhead 6 M3x10 Buttonhead 4 M3x12 Buttonhead 2 M3x40 Buttonhead Screw 3 M3x8 Flathead Screw 6 M3x6 Flathead Screw 11 M5x10 Buttonhead Screw 6 M3 Heat Tapered Insert 9 M5 Hammer Nut 6 Wiper 1 M3 Threaded 8mm Balls 3 O-rings 2 Wedge Plate 1