Jowl™ Recovery Split Shackle™ 3/4

COMBINE TWO COLORS!!!! Combo colors are sold as pairs and include two shackles. (GET 10% OFF!!) Use the DROPDOWN MENU above the Add to Cart button to choose your color combo. Introducing the "PATENTED" JOWL™ recovery split shackle™. Our innovative split "J" recovery shackle design eliminates the need for tools or soft shackles while making rope and strap connections faster eliminating the need to remove your shackles from your bumper or hitch receiver to make a connection, hook up a rope, or strap out on the trail. Fast TOOL-LESS closed recovery finally made easy!! Sorry, your browser doesn't support embedded videos. THIS CHANGES EVERYTHING! Just open up the Jowl™ shackle hooked sides, insert your recovery rope or tow strap looped end, rotate the end of the tow rope or strap to engage both sides of the shackle, pull tight and you are ready to recover your stuck vehicle. We designed the Jowl™ with a D-Ring shackle shape for those off-roaders who prefer a more traditional shackle look on their rigs. Built-in pull angle stops are visual reminders that give you feedback to help you keep your pull angles low keeping your recovery safe and as efficient as possible. The Jowl™ Recovery Shackle fits any 2.0 or 2.5 inch D-Ring tow shackle receiver hitch bracket mount with a 7/8" (0.875") pin hole and a mount width of 1-1/4" (1.25") or less. PLEASE NOTE: A very popular bumper mount hole inside diameter is often listed on bumper specs information as 1.0 inch. Many manufacturers use this common bore size when machining their mounts. However, after coating the entire bumper including the inside of the mount holes with thick textured or powder coatings this added thickness decreases the inside diameter of the holes well under 1.0 inch, down to around 0.950in, making the hole size too small for a 1.0 inch pin. In most cases a 1.0 inch diameter hole is intended for a 3/4 size shackle that has a 7/8” (0.875in) pin diameter. If your bumper has 1.0 mount holes please refer to our VEHICLE SIZE RECOMMENDATION GUIDES for further assistance. All color options are fully interchangeable. Buy two different color shackles and combine them to match the color scheme of your rig and give your build a more custom accented look. The hooked sides are fully covered with a durable powder coating pantone color matched to popular truck and Jeep colors. The shackle pin is Black Nickel plated and machined from High Strength Grade 8 Carbon Steel. This 5T (10,000 LB WLL) forged chromoly steel shackle is guaranteed to speed up vehicle recovery so you can spend more time enjoying the trail instead of being stuck in it. Built-in rubber anti-chatter pads stop the hooked sides from rattling against each other as you navigate the roughest trails. Each shackle includes four durable nylon shackle isolators. Two 3.0mm thick washers and two 2.0mm thick washers help you center your Jowl™ shackle on any width bumper shackle mount, gusset, winch rope, or shackle receiver. We made mounting the Jowl™ easy. The shackle pin is secured by two Metric M18 cap screws that accept any 1/4" socket wrench. Just grab two 1/4 inch ratchets and easily remove or attach the shackle to your vehicle without the need to find the correct allen keys or hex wrenches out on the trail. (Bonus: only one screw needs to be removed to attach or remove the shackle from your vehicle adding to the speed and functionality of this design.) Two 6mm Hex to 1/4" square drive adapters are also included with each Jowl™ split shackle™ for easy installation. Single Color is sold as one shackle All Two Color Combos are sold as pairs and include two shackles Black Hole - RAL 9005 Gun Gray - RAL 7015 Pure White - RAL 9003 Grape Escape - PSS-1676 Blue Balls - RAL 5005 Sublime Green - RAL 6018 Detonator Yellow - RAL 1023 Obscene Orange - RAL 2009 Flame Red - RAL 3020 Pretty Pink - RAL 4003 Pogo Pink - RAL 4010 Nice Gal - Galvanized / Nickel Coated Brass Knuckle - Yellow Zinc Coated Buff Bronze - UMB-4548 Raw Dog - Uncoated (See warning below - will rust if left uncoated) The "Raw Dog" uncoated option is ready to add primer and paint or powder coating so you can color match your vehicle or just add any finish of your choosing. Only the Jowl™ hooked bodies should be powder coated, not the pin. Coating the pin will hinder the assembly functionality. (***Please note: this option will show signs of weathering and rust if left uncoated.) Specs: Item: Split Shackle™ / Anchor Shackle Color: Pure White Pin Style: Proprietary Design WLL: 10,000 lb. Width Between Ears: 1-1/4" (1.25") Body Finish: Powder Coated Pin Finish: Black Nickel Plated Pin Diameter: 7/8" (0.875") Thread Size: M18 x 2.5mm Pin Material: Grade 8 Carbon Steel Body Material: Chromoly Steel PATENT No. D1,050,874 Manual: Jowl Split Shackle 3/4 Read First Instructions Manual: Raw Dog Custom Color Coating Instructions Resource: Split Shackle Vehicle Size Reference Guide Jowl™ Split Shackle™ Installation Save 15% when you purchase a Shackle Receiver Combo Today! Click Here More Specs and Dimensions View Other Colors