JL Audio VX800/8i 8-Channel Amplifier with DSP

JL Audio VX800/8i 8-Channel Amplifier with DSP Designed to simplify great audio, every VXi amplifier combines our advanced NexD2™ switching amplifier technology with an integrated, full-featured digital signal processor. With our second-generation NexD2™ technology, the VX800/8i full-range amplifier outputs up to 75 watts per channel into 4 ohms, or 100 watts into 2 ohms. It can also be bridged into 4 ohms to deliver a powerful 200 W x 4. The NexD2™ full-range technology in this amplifier is DSP-controlled and features a reduced loop area design utilizing DirectFET™ outputs for outstanding fidelity, very low noise and exceptional efficiency. The amplifier chassis is ultra-compact, with all connections on one side, to greatly simplify installation into tight spaces. Instead of traditional control knobs and switches, all amplifier adjustments and DSP functionality are configured via a compatible external device (PC, Tablet or Smartphone), with the appropriate JL Audio TüN™ Software application installed. Amplifier includes: Power Connector (for 2 AWG wire), Analog Input/Pre-Out Harness, Speaker Output Harnesses (2), 6 ft A/B USB Cable Specifications Rated Continuous (RMS) Power @ 14.4 V @ 4 Ω: 75 W RMS x 8 @ 2 Ω: 100 W RMS x 8 Bridged @ 4Ω: 200 W RMS x 4 Rated Continuous (RMS) Power @ 12.5 V @ 4 Ω: 60 W RMS x 8 @ 2 Ω: 90 W RMS x 8 Bridged @ 4Ω: 180 W RMS x 4 General Specifications Frequency Response: 12 Hz - 24 kHz (+0, -1dB) S/N Ratio, referred to highest rated power (Analog Inputs): 99 dB (A-weighted, 20 Hz - 20 kHz noise bandwidth) S/N Ratio, referred to 1 W (Analog Inputs): 80 dB (A-weighted, 20 Hz - 20 kHz noise bandwidth) S/N Ratio, referred to highest rated power (Digital Inputs): 101 dB (A-weighted, 20 Hz - 20 kHz noise bandwidth) S/N Ratio, referred to 1 W (Digital Inputs): 82 dB (A-weighted, 20 Hz - 20 kHz noise bandwidth) Damping Factor @ 4 Ω: >100 / 50 Hz Damping Factor @ 2 Ω: >50 / 50 Hz THD+N @ Rated Power: <1% @ 2 Ω per Ch. Input Voltage Range @ RCA Inputs: 200 mV - 16 V RMS Min.Copper Power / Ground Wire Gauge: 4 AWG wire Fuse Rating: 80 A (AFS, AGU or MaxiFuse™) Physical Specifications Width (W): 11.32 in / 287 mm Depth (D): 6.62 in / 168 mm Net Weight: 6.5 lb / 2.95 kg