JL Audio MV700/5i 5 Channel Marine Amplifier with Integrated DSP

JL Audio MV700/5i 5 Channel Marine Amplifier with Integrated DSP Engineered to deliver reference-grade audio performance in marine environments, every MVi amplifier unites our cutting-edge NexD2™ switching amplifier technology with an integrated, full-featured digital signal processor. Equipped with our second-generation NexD2™ technology, the MV700/5i is capable of powering a complete marine audio system. It can drive four main speakers with 75 W x 4 @ 4 ohms, while also powering a subwoofer with up to 300W @ 2 ohms. Bridging the main channels transforms it into a very powerful, 3-channel system amplifier with up to 200W x 2 @ 4 ohms on the main channels and 300W @ 2 ohms on the subwoofer channel. The NexD2™ full-range technology in the main channels of this amplifier is DSP-controlled and features a reduced loop area design utilizing DirectFET™ outputs for outstanding fidelity, very low noise and exceptional efficiency. The subwoofer channel features an optimized low-frequency variant of the NexD2™ technology. The amplifier chassis is a ultra-compact, cast alloy design with marine-grade powder coat finish and corrosion-resistant hardware. Instead of traditional control knobs and switches, all amplifier adjustments and DSP functionality are configured via a compatible external device (PC, Tablet or Smartphone), with the appropriate JL Audio TüN™ Software application installed. Amplifier includes: Power Connector (for 4 AWG wire), Speaker Output Harnesses (2), Subwoofer Output Harness, 6 ft A/B USB Cable Specifications Rated Continuous (RMS) Power @ 14.4 V Main Channels @ 4 Ω: 75 W RMS x 4 Main Channels @ 2 Ω: 100 W RMS x 4 Main Channels - Bridged @ 4Ω: 200 W RMS x 2 Subwoofer Channel @ 4 Ω: 180 W RMS x 1 Subwoofer Channel @ 3 Ω: 240 W RMS x 1 Subwoofer Channel @ 2 Ω: 300 W RMS x 1 Subwoofer Channel @ 1.5 Ω: N/A Rated Continuous (RMS) Power @ 12.5 V Main Channels @ 4 Ω: 60 W RMS x 4 Main Channels @ 2 Ω: 90 W RMS x 4 Main Channels - Bridged @ 4Ω: 180 W RMS x 2 Subwoofer Channel @ 4 Ω: 180 W RMS x 1 Subwoofer Channel @ 3 Ω: 240 W RMS x 1 Subwoofer Channel @ 2 Ω: 300 W RMS x 1 General Specifications Frequency Response (Main Channels): 12 Hz - 24 kHz (+0, -1dB) Frequency Response (Subwoofer Channel): 12 Hz - 1 kHz (+0, -1dB) S/N Ratio, referred to highest rated power (Analog Inputs - Main Channels): 99 dB (A-weighted, 20 Hz - 20 kHz noise bandwidth) S/N Ratio, referred to highest rated power (Analog Inputs - Subwoofer Channel): 99 dB (A-weighted, 20 Hz - 20 kHz noise bandwidth) S/N Ratio, referred to 1 W (Analog Inputs - Main Channels): 80 dB (A-weighted, 20 Hz - 20 kHz noise bandwidth) S/N Ratio, referred to 1 W (Analog Inputs - Subwoofer Channel): 72 dB (A-weighted, 20 Hz - 20 kHz noise bandwidth) Damping Factor @ 4 Ω: >150 / 50 Hz Damping Factor @ 2 Ω: >50 / 50 Hz THD+N @ Rated Power (Main Channels): <1% @ 2 Ω per Ch. THD+N @ Rated Power (Subwoofer Channels): <1% @ 2 Ω per Ch. Input Voltage Range @ RCA Inputs: 250 mV - 16 V RMS Min.Copper Power / Ground Wire Gauge: 4 AWG wire Fuse Rating: 60 A (AFS, AGU or MaxiFuse™) IP Rating: IPX2 (when mounted vertically with connections pointed downward) Physical Specifications Height (H): 2.05 in / 52 mm Width (W): 13.96 in / 355 mm Depth (D): 6.93 in / 176 mm Net Weight: 5.6 lb / 2.54 kg