JD Select Water-Based Boat Bottom Paint

EXCELLENT SINGLE-SEASON ANTIFOULING PAINT  JD Select is a water-based bottom paint, with a forgiving formula that applies smoothly and is easy to clean up using soap and water. An eco-friendly alternative to conventional solvent-based paints, JD Select features a medium copper load to help keep barnacles, slime, and algae at bay in fresh and salt water. Ideal for marinas and boatyards with VOC restrictions. This ablative bottom paint wears away evenly for consistent biocide release while minimizing paint buildup. Designed for boats that stay in the water throughout the season, it’s a great choice for powerboats and sailboats in light-to-moderate fouling conditions. GREAT RESULTS FOR DIY BOATERS AND MARINE PAINTERS Whether you're painting your own boat or a professional working in a boatyard, JD Select delivers smooth, uniform finishes on properly prepared fiberglass, wood, and primed steel boat hulls. Use a 3/16" nap roller for even coverage and a foam or chip brush for detail work, or spray with conventional or airless equipment on larger surfaces. Because this bottom paint is water-based, it flows smoothly after stirring, but can be thinned with 5-10% water as needed for your painting conditions. Once the job is done, use soap and water to clean up without harsh solvents. Not sure how much boat paint you’ll need? Try our simple antifouling paint calculator to estimate how much you'll need for your project. PAINT AND LAUNCH THE SAME WEEKEND  Depending on the temperature, JD Select dries in 1.5-6 hours so you can paint in one weekend. For best results, work in 50-90°F temps with <90% humidity. Dry time to launch ranges from 6-16 hours, so let cure overnight after you've applied your final coat. Not ready to go into the water? Unlike hard antifouling paints, the biocide remains active with no max dry time window, offering more flexibility around prep and paint schedules during spring maintenance. JD SELECT ANTIFOULING PAINT DETAILS Water-based bottom paint with low VOCs for easier application and reduced environmental impact Medium copper load (25.5%) helps prevent barnacles, slime, and algae for reliable single-season protection Use on fiberglass, wood, and primed steel hulls in saltwater, freshwater, or brackish water Compatible with existing ablative and hard bottom paints in good condition Apply by brush, roller, or spray; thin up to 10% with water if needed Smooth ablative finish can be burnished for improved hull performance Soap and water cleanup with no harsh solvents required Colors: Choose from Black, Blue, Green, and Red Sizes: Available in Gallons and Quarts Gallon Bonus: Each Gallon order includes a paint roller frame, recommended 3/16″ nap solvent-safe roller cover, metal tray, 10" stir stick, XL paint suit, 2" chip brush, a maroon abrasive pad, and a roll of 1" painter’s tape. For additional supplies, we also offer this Bottom Painting Supplies Kit separately. Recommended Primer: TotalBoat TotalProtect Epoxy Barrier Coat Primer Recommended Brush: Chip Brushes Not for use on aluminum hulls - use TotalBoat AlumiPaint AF Aluminum Antifouling Paint or TotalBoat Krypton Copper-Free Bottom Paint on aluminum Storage: Store in a cool, dry, well-ventilated area, protect from freezing.