Japa 395 Firewood Processor

Since 1977, Japa has been manufacturing efficient and powerful firewood processors in Finland.  In mid-2025, Japa signed the contract with us to setup Wolfe Ridge as the sole USA importer and distributor of Japa Firewood Processors and accessories.  The Japa 395 can process up to 16 inch diameter, and split up to 20.5 inch lengths.  The 395 is easy to use with electric over hydraulic joystick control of infeed / cut / split functions, hydraulic knife height adjustment, and more.  This machine is offered in three power source configurations: PTO powered (any tractor with a 540 RPM PTO shaft and more than 35 horsepower), 480 volt 3 phase electric, or the Honda iGX700 v-twin gas engine package. The Japa 395 is extremely easy to operate with one hand joystick control of infeed / sawing / splitting functions.  Push the joystick up and to the left to infeed the log, pull the bottom electric trigger and down on the joystick to cut, pull the top trigger on the joystick to engage the split cycle – which then cycles forward and back automatically.  Optional hydraulic log racks are available for this machine – we recommend the 471 2 chain rack for best optimal performance.  A 4.2M / 13.8′ powered outfeed conveyor is standard with this machine. Electric over hydraulic joystick controlled with EASY one hand operation of infeed / cut / split functions Hydraulic powered infeed belt with forward and reverse Adjustable hydraulic log stop – stops infeed belt when desired cut length is reached Fully guarded saw / split chamber – saw and splitter operation halts if guard is open Hydraulic joystick controlled adjustable 6 way knife included as standard Speed control for outfeed conveyor included standard Adjustable chainsaw come-down pressure Overhead idle roller clamp for infeed Programmable shelf for controlled drop of wood into split chamber 3 point hitch connections* and pallet fork pockets for mobility *3 point not accessible on Honda powered model* 1 year warranty on machine 3 year warranty on Honda iGX engine option The 395 is a great choice for the professional firewood producer that wants a powerful stationary machine that can process up to 16 inch diameter timber quickly – process 2-3 full cords per hour with the right logs!  For great results in your wood yard every time, choose a Made-in-Finland Japa, offered in the USA by Wolfe Ridge!!  *For Perfect Split functionality in this same frame, see the Japa 405* Tech Specs PTO powered version 540 RPM PTO shaft included – to be ran at 400 RPM 35+ PTO horsepower required to efficiently saw and split simultaneously Electric powered version 480V 3 phase electric required 10kW motor – 30A plus circuit required Honda iGX700 powered version 22 horsepower v-twin with EFI and electronic governor Front panel controls of engine including display readout TWO 6 gallon marine fuel tank with quick connects included Max input diameter 16 inch Max input lengths of 8 feet OR up to 16 feet with an optional log rack Max cut length of 20.5 inch long Joystick control of infeed / cut / split functions Forward AND reverse of infeed belt Adjustable split size 6 way hydraulically adjustable knife included Optional 4-way available Optional 8-way available Optional 12-way available *For use with soft wood only* 4.2M/13.8′ hydraulic outfeed conveyor included Mechanical pivot with 5 positions Speed control regulator included with 395 Adjustable automatic bar oil pump with separate reservoir Rated at 12.5 ton splitting force 16″ bar and chain 3/8 / .058 / 61 DL Weight: 2,800LB Optional operator terrace / platform and machine risers – built to order / no retrofit Optional Perfect Clean system available – built to order / no retrofit Includes Perfect Clean shaker system Includes rear discharge conveyor for chaff / debris Includes operator terrace / platform and machine risers Shipping Japa Firewood Processors ship via partial flatbed / hotshot trucking.  You could also pick up your new machine from the Wolfe Ridge factory here in Eau Claire, Wisconsin.  You can also check with our USA Japa dealers – they may have the machine you are looking for in stock now: https://japa.fi/en/dealers/ Please note:  If you have a machine shipped via partial flatbed or hotshot, you will need a piece of equipment for unloading.  Such as a forklift, tractor or skid steer with pallet forks and sufficient lifting capacity. If you choose to pickup your machine at the factory, we can offer on site training and demonstration of your machine to you at no additional charge. Video   Questions? Please enable JavaScript in your browser to complete this form.Please enable JavaScript in your browser to complete this form.Name *FirstLastPhoneEmail *Message *View our Privacy PolicySend