ITH Princess Crown Bow

This has been done several ways so that it can be 4x4 friendly for people that only have a 4x4 machine. This design comes in a small and a large. The small comes in 5x7 with all 4 pieces grouped in that hoop. It also comes in Small Part A 4x4 and Small Part B 4x4. If you only have a 4x4 machine you will want to stitch both Part A and Part B before constructing your bow. The large comes in 6x10 with all 4 pieces grouped in that hoop. It also comes in Large Part A 5x7 and Large Part B 4x4. If you only have a 5x7 you will need to complete both hoopings in order to construct the bow with all of the pieces. Unfortunately, some of the Large Bow Pieces are too large to fit in a 4x4 hoop so those with only a 4x4 hoop will not be able to complete the large bow. PLEASE NOTE: This is a digital machine embroidery design file…NOT an actual item! You MUST have an embroidery machine in order to use this file. Design Details: SIZE: Small Bow Part A and Part B in a 4x4, Small Bow grouped in 1 hoop 5x7, Large Bow Part A 5x7 Part B 4x4 and Large Bow grouped in 1 hoop 6x10 Stitch Map Included in the zip file - step by step written directions included Formats Included in the Zip file: DST, HUS, JEF, XXX, VIP, VP3, EXP and PES If you need another format, please let us know…. If there is any problems with your download please let us know. Please note: This is an embroidery design not a patch. You will need an embroidery machine to stitch out the file. If you have a program you can also change the format if needed. PLEASE NOTE: As with any digital media, there are no refunds! This design may not be shared, sold or redistributed in any format. The digital files may not be altered in any manner.