iRESTORE Professional Laser Hair Growth System

iRESTORE Professional | Laser Helmet iRESTORE Professional Laser Hair Growth System The iRESTORE Professional Laser Hair Growth System is a laser helmet built around 282 diodes, 82 laser diodes and 200 LEDs, with all 282 of them emitting at 655 nm. Total optical power for the helmet is 1,410 mW. The shell is the longer of the two white helmets in the range, reaching forward to the hairline, out over the temples and down the sides as well as covering the crown, and it weighs 1.25 lb on the head. A session lasts 25 minutes and the helmet goes on every other day, on non-consecutive days, with a handheld controller carrying the timer display and a cable running to the shell. Power comes from a universal power adapter, so the helmet is corded unless the rechargeable battery pack is added to the order. That pack and the carrying case shaped for this device are both sold separately. What arrives in the carton is the device, the universal power adapter, the controller with its timer display, a user manual and a quick start guide. Nothing else travels with it, so the case that turns the helmet into luggage and the battery pack that takes it off the wall socket are both separate lines on an order. Cover on this device runs to 2 years. Returns on these hair devices close 12 months from the date of purchase, the authorization is raised between day 365 and day 400, and a 25 percent service fee applies to the refund. The iRESTORE Professional holds FDA 510(k) clearance K183417. It is a Class II device, product code OAP, under 21 CFR 890.5500. As a laser product the helmet is rated Class 3R, with each laser diode running at under 5 mW, and the cautions packed with it are set out in full below the hardware. Diodes 282 82 laser diodes beside 200 LEDs Wavelength 655 nm A single wavelength throughout Total output 1,410 mW Class 3R laser product, each laser diode under 5 mW Session 25 minutes On alternating days 1.25 lb, worn without a strap or a stand Shell reaches the hairline, the temples and the sides Carrying case and battery pack ordered separately Warranty term of 2 years The hardware Two Hundred and Eighty-Two Diodes on a Single Wavelength Emitter count, total output and the length of the shell are where this helmet sits apart from the smaller one, and the wavelength and the session pattern are where the two are identical. 01 Eighty-Two Lasers and Two Hundred LEDs 282 emitters fill the inner face of the shell: 82 laser diodes and 200 LEDs. The lasers are the edge-emitting type and the LEDs are super-luminescent diodes, and the two sit interleaved across the whole covered area. Set against the 120 emitters of the iRESTORE Essential, the extra count is mostly LEDs, with 31 more laser diodes on top of that. Neither number varies from one unit to the next, since the inner face carries a fixed array with nothing to add or remove. 282 diodes 02 Fourteen Hundred and Ten Milliwatts in One Shell Total optical power comes to 1,410 mW, which is the number to read beside the emitter count when two helmets are being compared. The iRESTORE Essential delivers 600 mW over its 120 emitters and the iRESTORE Elite delivers 2,500 mW over 500. Output and count move together on these three helmets, though they do not move at the same rate, so both figures earn a place on a comparison. 1,410 mW 03 A Shell Long Enough for the Temples The shell on this model is the extended one. Where the smaller helmet concentrates on the top of the head and the crown, this shape carries emitters forward to the hairline, out across the temples and down the sides of the head as well. More area calls for more emitters, since the same spacing across a larger inner face takes more diodes to fill it, and the weight carried on the head rises with it to 1.25 lb. Hairline to sides 04 The Case and the Battery Pack Are Sold Separately Two accessories are built around this device and neither one arrives with it. The iRESTORE Professional Carrying Case is shaped to the helmet and holds the plug and the battery pack alongside it, and the iRESTORE Rechargeable Battery Pack - Professional and Essential clips to a belt and joins the digital remote magnetically. Both are ordered on their own, and the battery pack carries a 30 day return window where returns on the device run to 12 months with a 25 percent service fee applied to the refund. Two accessories In the box What Ships With the iRESTORE Professional Eight figures and facts do most of the work when somebody is deciding between the three helmets, and all eight of them are hardware, packaging or cover. 01 Two Hundred and Eighty-Two Diodes The inner face holds 282 emitters, made up of 82 laser diodes and 200 LEDs. 02 Output of 1,410 mW Total optical power for this helmet is 1,410 mW. 03 Both Emitter Types at 655 nm Lasers and LEDs alike emit at 655 nm, with no second wavelength on this model. 04 The Helmet Weighs 1.25 lb Weight on the head is 1.25 lb, the heaviest of the three iRESTORE helmets. 05 A Longer Shell Than the Smaller Helmet Emitters reach the hairline, the temples and the sides as well as the crown. 06 Corded Unless You Add the Pack A universal power adapter feeds the controller, and the belt pack is a separate order. 07 Four Items Packed Beside the Device The carton holds the adapter, the controller with its timer display, a manual and a quick start guide. 08 Two Years of Cover on the Device The warranty term is 2 years, and returns on the hair devices close at 12 months with a 25 percent service fee applied to the refund. In detail The Longer Shell and What Runs It Inside 162 More Diodes Than the iRESTORE Essential Turn the helmet over and the whole inner face is emitters, 82 laser diodes and 200 LEDs laid across it, 162 more than the 120 in the iRESTORE Essential. The additional area at the front and the sides is what the higher count fills, so the spacing between emitters stays close to that of the smaller helmet while the covered area grows. Every one of the 282 runs at 655 nm, and the total they add up to is 1,410 mW. Nothing on the inner face is adjustable or removable. 82 laser diodes of the edge-emitting type 200 super-luminescent LEDs All 282 emitters at one wavelength, 655 nm 1,410 mW of total optical power 282 diodes 655 nm 1,410 mW Power Running the Helmet Off a Belt Pack As delivered, the helmet is corded: a universal power adapter sits at the wall and a cable runs to the controller. Adding the belt pack changes that, since the pack joins the digital remote magnetically and needs no cable of its own. It stores 3,200 mAh and 16 Wh, drawing 5V/2.4A on charge and delivering 5V/1.5A, and the same pack serves the iRESTORE Professional and any iRESTORE Essential purchased after April 2022, though it cannot be shipped internationally. Universal power adapter in the carton Belt pack joins the digital remote magnetically 3,200 mAh and 16 Wh in the pack 30 day return window on the pack itself Corded as delivered Belt pack optional Travel The Carrying Case Holds the Plug and the Pack The case built for this helmet is shaped closely to it and takes the power plug and the battery pack in the same compartment, with a handle on the outside for carrying. It is ordered separately, and it is the only case iRESTORE sells on its own for a helmet in this range; the iRESTORE Elite ships with a protective carry case inside its own carton. The case itself is non-refundable under iRESTORE's accessory terms, where the helmet carries a 12 month return term and the battery pack 30 days. Shaped to this helmet and no other Holds the device, the plug and the battery pack Handle on the outside for transport Ordered separately from the helmet Sold separately Handle for carrying Safety Who Should Not Use the iRESTORE Professional These cautions come with the device and they are worth reading before the first session. Do not use the helmet if any line below applies to you, and consult a doctor if you are unsure about one of them. Do not use the device if you have any medical condition which makes your skin sensitive to sun or light. Do not use the device if you have cancer on your scalp. Do not use the device if you have sensitive skin, or if you are allergic to this specific wavelength of light, 640 to 665 nm. Do not use the device if you are under the age of 18. Do not look directly at the laser light, and do not use optical instruments such as magnifiers or microscopes to look at it. Discontinue use and consult a doctor if scalp itching or tingling persists for more than one hour after a session. Do not get the device or the adapter wet. Never use the device while bathing or in a pool. Do not use the device when your hair is wet. Keep away from children and pets. Anyone who is not sure whether one of these lines applies should check with a doctor before the first session. The range The Three iRESTORE Laser Helmets Sitting between the other two, this helmet carries more than twice the emitters of the smallest and a little over half of those in the largest, on the same wavelength as the smallest and the same session pattern. iRESTORE Essential The entry helmet in the iRESTORE laser range, carrying 120 diodes at one wavelength and worn for 25 minutes every other day. 120 diodes: 51 laser diodes and 69 LEDs 655 nm, a single wavelength 600 mW of total optical power 25 minutes every other day 1.03 lb, with a 2 year warranty See the iRESTORE Essential You are here iRESTORE Professional The middle helmet in the iRESTORE laser range, with a longer shell that reaches the temples and the sides on the same 25 minute cycle. 282 diodes: 82 laser diodes and 200 LEDs 655 nm, a single wavelength 1,410 mW of total optical power 25 minutes every other day 1.25 lb, with a 2 year warranty Currently viewing iRESTORE Elite The only iRESTORE helmet built on three wavelengths, running 500 diodes and 2,500 mW on a 12 minute daily cycle. 500 diodes: 300 laser diodes and 200 LEDs 625, 655 and 680 nm 2,500 mW of total optical power 12 minutes daily 1.20 lb, with a 3 year warranty See the iRESTORE Elite Questions Common Questions About the Professional Helmet How many diodes are in the iRESTORE Professional?+ 282 emitters: 82 laser diodes and 200 LEDs. All of them sit at 655 nm and together they come to 1,410 mW of total optical power. For comparison, the iRESTORE Essential holds 120 emitters at 600 mW. What is the difference between the iRESTORE Professional and the iRESTORE Essential?+ Count, output and shell length. This model carries 282 emitters at 1,410 mW in a shell that reaches the hairline, the temples and the sides; the iRESTORE Essential carries 120 at 600 mW in a shell built around the top of the head and the crown. Wavelength and session pattern are identical on the two, at 655 nm for 25 minutes every other day. How long does an iRESTORE Professional session take?+ 25 minutes, repeated every other day on non-consecutive days. The controller holds the timer and closes the session when the clock runs out. A daily 12 minute pattern belongs to the iRESTORE Elite and not to this helmet. Does the iRESTORE Professional come with a carrying case?+ No. The carton holds the device, the universal power adapter, the controller with its timer display, a user manual and a quick start guide. The iRESTORE Professional Carrying Case is a separate order, and it is the case shaped to this helmet. Which battery pack fits the iRESTORE Professional?+ The iRESTORE Rechargeable Battery Pack - Professional and Essential, which clips to a belt and joins the digital remote magnetically. It holds 3,200 mAh and 16 Wh, draws 5V/2.4A on charge and delivers 5V/1.5A. Its return window is 30 days, and international shipping is not available on battery packs. How much does the iRESTORE Professional weigh?+ 1.25 lb, which makes it the heaviest of the three helmets, ahead of the iRESTORE Elite at 1.20 lb and the iRESTORE Essential at 1.03 lb. The controller and the adapter stay off the head. Who should not use the iRESTORE Professional?+ Anyone under the age of 18, and anyone covered by the cautions supplied with the device. Avoid use if a medical condition leaves your skin sensitive to sun or light, if there is cancer on your scalp, or if you are allergic to light at 640 to 665 nm. Never use it in the bath or a pool, and keep away from children and pets. Is eye protection needed with the iRESTORE Professional?+ The helmet is a Class 3R laser product with each laser diode running at under 5 mW. Do not look directly at the laser light, and do not use magnifiers, microscopes or other optical instruments to look at it. Once the shell is on, the emitters face in at the head. What warranty does the iRESTORE Professional carry?+ A 2 year warranty on the device. Returns on the device close 12 months after the purchase date, the authorization is raised between day 365 and day 400, and a 25 percent service fee applies to the refund. The battery pack sits on a 30 day window and the carrying case is non-refundable. Can the iRESTORE Professional be used every day?+ It is worn every other day, on non-consecutive days, for 25 minutes at a time. A day between sessions is part of the pattern this device is built around. The helmet in the range that goes on daily is the iRESTORE Elite, at 12 minutes a session.