IR Array Thermal Camera Wireling

DESCRIPTION This Wireling gives your project heat-vision in an 8x8 array of temperature output using the Infrared Array Grid-EYE AMG8833 Sensor! This can be used to detect the passage of humans, animals, and keep track of how hot your PC is getting. New to Wirelings? Check out the Wireling Overview! Note* 5-Pin Wireling cables not included and sold separately. TECH SPECS AMG8833 IR Array Sensor Specs Temperature detection of 2D area: 8x8 (64 pixels) Digital output of temperature readings Human detection up to 7m Temperature accuracy: High gain: Typical ± 2.5°C  Low gain: Typical ± 3.0°C  Setup time typical 50ms, time to stabilize typical 15s Viewing angle typical 60° ± 5.6° TinyDuino Power Requirements Voltage: 3.0V - 5.5V  Current: Normal: 4.5mA Sleep mode: 0.2mA Stand-by mode: 0.8mA Pins Used A5/SCL - I2C Serial Clock line A4/SDA - I2C Serial Data line Dimensions 15mm x 10mm (0.59 inches x 0.39 inches) Max Height (from the lower bottom of Wireling to upper top Wireling Connector): 8 mm (0.31 inches) Weight: 1 gram (.04 ounces) NOTES You can also use this shield without the TinyDuino – by clipping the connector off the opposite end and soldering the wires to another board, you can use it with the microcontroller or dev board of your choosing! DOWNLOADS AMG8833 Datasheet Eagle Files Schematic Arduino Example Sketch CAD 3D and 2D Files