IR Emitter Wireling

DESCRIPTION This Wireling features an 880 nm IR LED and can be used with our 38kHz IR Receiver Wireling or other IR receivers (like television sets). New to Wirelings? Check out the Wireling Overview! Note* 5-Pin Wireling cables not included and sold separately. TECH SPECS XZTHI56W Specs Emitting Material: GaA1As Lens-color: Water Clear Radiant Intensity CIE127-2007* (Po=mW/sr) @20mA: Min: 1* Typ 2.3* Wavelength CIE127-2007* nm λP: 880* Viewing Angle 2θ 1/2: 30° ~1.5m range when paired with the IR Receiver Wireling TinyDuino Power Requirements Voltage: 3.0V - 5.5V  Current: 10µA (Normal Mode). Pins Used A5/SCL - I²C Serial Clock line A4/SDA - I²C Serial Data line AX - Where X is the pin number (0-3) used in reference to Wireling Port number Dimensions 10mm x 10mm (.394 inches x .394 inches) Max Height (from the lower bottom of Wireling to upper top Wireling Connector): 3.70mm (0.15 inches) Weight: 1 gram (.04 ounces) NOTES You can also use this Wireling without the TinyDuino – modifying the connecting cable by removing the opposite connector and stripping/tinning the wires, you can solder the connector cable to any other microcontroller board of your choice!    DOWNLOADS XZTHI56W Datasheet Schematic Eagle Files CAD 3D and 2D Files