Intermatic FF360M Commercial Countdown Timer

Spring Wound Countdown Timer, Commercial, 125-277 VAC, 50/60 Hz, SPDT, 60 Minute Max The FF Series Commercial Countdown Timers are designed to replace any standard wall switch and do not require electricity to operate. These energy-efficient switches automatically limit the ON times for fans, lighting, motors, heaters, and other energy consuming loads. A commercial "brushed metal" look plate (plastic construction) meets NEC requirements. *NOTE: Not for use with sunlamps, saunas, or loads that could cause personal injury if timed incorrectly. 60-Minute timer SPDT (Single-Pole Double-Throw) Breaks circuit at end of timing cycle No electricity required to operate Replaces any standard or decorator single-gang wall switch Automatically limits ON time for energy consuming loads Quick and easy installation Time-saving up front terminal connection with teeter-type terminals Brushed metal look switch plate meets NEC requirements (plate is included) Incandescent/fluorescent/CFL/LED compatible Length (in.) 4.175" Width (in.) 1.75" Depth (in.) 1.25" Weight (lbs) Each .29 lbs Spec Sheet Spec Sheet Installation Instructions Info Type Spring Wound Countdown Timer, Commercial, 125-277 VAC, 50/60 Hz, SPDT, 60 Minute Max, Without Hold, Silver Certifications cSA Certified Operation Mode Countdown Countdown Time 60 min Hold Mode Included No Mechanism Type Analog/Mechanical Color Silver (Faceplate Included) Warranty 1 Year Limited       Additional Info  Load Ratings Resistive Heater  20 A, 2500 W, 125 VAC; 10 A, 2500 W, 250 VAC; 10 A, 2770 W, 277 VAC Tungsten (Incandescent) Range(s)  7 A, 125 VAC, 50/60 Hz, 875 W Motor Load Ratings Ranges 1 HP, 125 VAC; 2 HP, 250 VAC  Electrical Specifications Wiring Configurations Single Switch Type  SPDT Input Voltage Range(s) 125-277 VAC, 50/60 Hz Neutral Connection Required  No