Instrument Cluster programming (K2xx)

Custom IPC tuning with odometer/hours correction for:   2014-2018 K2xx Silveado/Sierra 1500 2019 K2xx Silverado LD 2015-2019 K2xx Silverado/Sierra 2500/3500 2015-2020 K2xx Tahoe/Suburban/Yukon/Escalade 2019+ Silverado MD 4500/5500/6500 2015-2018 Colorado/Canyon You must already own a BT DieselWorks AutoSync device to use this!!! This is an AutoSync programming license for used clusters that will add the ability to: Adjust odometer mileage value Adjust engine idle hour meter value Adjust engine run hour meter value VIN learn/marry any used instrument cluster into your vehicle (ie if you want to swap the 4" color DIC instrument cluster in your 2014-2019 pickup truck to the 8" Denali style) Adjust coolant temp gauge scaling Adjust backlight dimming curves/styles Modify chimes/turn signal noises Add/remove warning messages and error lights (TPMS, park assist, trailer brake, suspension etc) Add new DIC menus/features Add HUD Change DIC theme/graphics Transmission type/gear indicator change And more!  Once the programming has been purchased, the license should be activated within 24 hours, and you can then run the AutoSync WiFi firmware update to download the license to your device. Key on/engine off, go into the AutoSync menu. Then go to "Module Programming". Go to "Odometer/Hours/VIN update". Follow the on-screen instructions. If the "Odometer/Hours/VIN update" menu item does not appear in the module programming list, try the AutoSync firmware update again. K2xx instrument cluster swapping notes...you are on your own for sourcing the correct instrument cluster and compatible part numbers (ie if you want to swap your 4" color screen IPC for the 8" color screen IPC). We do not provide any tech support for IPC swaps, we only allow the programming to marry a used IPC to the vehicle. Without properly marrying a used IPC to your vehicle using our software, the odometer will not work (it will show "------", and it could cause immobilizer/theft deterrent problems.