Instrument Cluster programming (GMT-900)

Custom IPC tuning with odometer/hours correction for:   2007-2014 GMT-900 Tahoe/Suburban/Avalanche/Escalade/Yukon 2007.5-2014 GMT-900 Silverado/Sierra 2500/3500 2007.5-2013 GMT-900 Silverado/Sierra 1500   You must already own a BT DieselWorks AutoSync device to use this!!! This is an AutoSync programming license for used clusters that will add the ability to: Adjust odometer mileage value Adjust engine hour meter value VIN learn/marry any used instrument cluster into your vehicle Adjust coolant temp gauge scaling Adjust backlight dimming curves/styles Add/remove warning messages and error lights (TPMS, park assist, trailer brake, suspension etc) Transmission type/gear indicator change And more!  Once the programming has been purchased, the license should be activated within 24 hours, and you can then run the AutoSync WiFi firmware update to download the license to your device. Key on/engine off, go into the AutoSync config menu, then scroll to Vehicle Setup, then scroll to "ODO/Hrs Update". If "NOT LICENSED" appears, try the AutoSync firmware download again. Press the cruise control RES+ button to enter the odometer/hours setup menu. To adjust odometer, turn tow/haul mode OFF. To adjust hour meter, turn tow/haul mode ON. Press the cruise control SET- button to adjust the "jump" value (ie how many miles the odometer/hours setting will increase/decrease with each press of the +/- tapshift buttons). Press the cruise control RES+ button to program miles and hours.