INSTEON Micro Open/Close Motor Control Module 2444-222

Add INSTEON Remote Control to Window Shutters, Blinds, Projector Screens and More Overview Control motorized projection screens, window shutters, blinds and more The smallest inline module ever! Fits into almost all boxes Sense wires allow for control via a connected, hard-wired switch Compatible with latching switches as well as single momentary and dual momentary switches Essential Info Want to add wireless remote control to your automated window shutters, blinds and projector screens? INSTEON makes it easy. Micro Open/Close Module is the first INSTEON device designed specifically for up/down and open/close motor-controlled appliances. By including the Micro Open/Close module as a part of your INSTEON home automation network, you will enjoy remote control of your shutters, blinds, screens and more. This compact module installs behind your existing switch, giving it full INSTEON automation while retaining local control at the switch by way of sense wires. The patented INSTEON dual-band communication reliably sends signals over existing electrical wires (powerline) in your home and via radio frequency (RF). Micro Open/Close Module is so tiny that it can even be installed as an in-line module within a fixture box (like an In-LineLinc), providing remote control without running legs for a wall switch. INSTEON also offers a Micro Dimmer Module and a Micro On/Off Module. More Info INSTEON Micro Open/Close is compatible with latching, single momentary and dual momentary switches. By default, it comes programmed for latching switches such as paddles and toggles; it is easily configured for single and dual momentary switches with a simple reprogramming procedure during installation. Due to its hidden nature, we highly recommend using a home management controller HomeRunner RBI or the free INSTEON app with INSTEON Hub to manage Micro Open/Close. General Product Name: INSTEON Micro Open/Close Brand/Manufacturer: INSTEON Manufacturer Product No.: 2444-222 UPC: 813922012767 Warranty: 2 years, limited INSTEON INSTEON: Controller and responder Maximum links/scenes: 400 Status LED: Green when load is on, red when load is off , Blinks red once when responder does not acknowledge/blinks green once if all responders acknowledge (can be disabled via software), Blinks green or red during setup, Blinks red to indicate traffic (must be enabled via software) LED brightness: Adjustable from off to 100% bright Local control: Yes Commands supported as controller: On, Off, Fast on, Fast off, Begin brighten, End brighten, Begin dim, End dim Commands supported as responder: Open (on), Close (off), Fast on, Fast off, Begin raise (brighten), End raise (brighten), Begin lower (dim), End lower (dim), Beep Software configurable: Yes RF range: Up to 164 feet open air (may vary due to local interference) Phase detect beacon: Yes X10 support: Yes X10 addresses: Any 1 of 256 (unassigned by default) INSTEON device category: 0x0E window coverings INSTEON device subcategory: 2444-222 (915MHz), 0x01 Mechanical Mounting: Behind switch or above fixture in single-gang electrical box Wire connections: Sense 1 (yellow): 24 AWG, 0.205mm2,Sense 2 (purple): 24 AWG, 0.205mm2 Max. cable size: 4mm2 12 AWG (2.72mm diameter)  Min. cable size: 1.5mm2, 15 AWG Screw clamp connections: Line, Load 1, Load 2, Neutral Case color: White Set button: Yes Plastic: UV stabilized ABS+PC Beeper: Yes Beep on button press: Beeps when button is pressed or connected switch is tapped (must be enabled via software) LED: 1 RGB Dimensions: 1.8"H x 1.8"W x 0.6"D Weight: 2.52 oz Operating environment: Indoors Operating temperature range: 32° to 104°F (0° to 40°C) Operating humidity range: 0-90% relative humidity Storage temperature range: -4° to 158°F (-20° to 70°C) Electrical Voltage: 100VAC to 240VAC Frequency: 50/60Hz auto-detected at power-up Load types: Resistive, Motor Hardwired remote control: Yes, dual momentary switches supported Retain all settings without power: Yes, saved in non-volatile EEPROM Standby power consumption: <1W Safety approved: ETL Certifications: FCC, UL, IEC, EN FCC ID: SBPMM01