Insta-Rail® 42" Vertical Cable Railing System Kit

Insta-Rail® Vertical Cable Railing kits are an affordable and contemporary stainless steel vertical infill railing kit. Compatible with both new or existing framing Insta-Rail® Vertical Cable Railing kits can be used on both wood and composite decking materials. If you are looking for high quality deck remodeling ideas Insta-Rail® Vertical Cable Railing kits are the perfect and convenient way to upgrade your current deck railing and replace existing wood pickets or spindles. See the difference with Insta-Rail® while enjoying those newly opened sightlines and a maintenance free railing solution. Made with premium stainless steel 1/8-inch diameter cables, each Insta-Rail® kit will complete a railing area 72 inches long and is designed for railings 42 inches in total height. Insta-Rail® Vertical Cable Railing kits requires a 30-1/2 to 30-3/4 inch opening between the top and bottom rails of your framing - see reference guide for details. Please note: Depending on installation method, condition of framing, and the inherent nature of cable railing itself, a slight flex in cable may result in code failure over the 4” sphere test.  For 100% IRC code compliance we recommend using our Insta-Rail Tube Railing Kit. Designed for use with railing frames with an overall height of 42 inches Requires an install area of 30-1/2 in to 30-3/4 inches between top and bottom rails Each kit covers six linear feet (72 inches) and can be easily combined or cut down to suit any size project Cables measure 28-1/4 inches and provide 3-inch center-on-center spacing Can be installed on new or existing wood or composite materials to give an open, modern feel to any space Grade 304 stainless steel components - not suitable for use in saltwater climates Homeowner is responsible for verifying local code compliance Installation is DIY friendly and can be completed with basic household tools Components Include: 24 Cable Balusters - 28-1/4" Long x 1/8" Diameter 4 Stainless Steel Channels - 36" Long 48 Stainless Steel Threaded Cable Studs 52 Stainless Steel Anchor Screws 1 Bending Tool for stairs Open-End Wrench – 5/16" (8mm) Tools you will need: Power Drill with a Phillips Head Driver & 5/16" (8mm) Drill Bit Tape Measure Hack Saw (if cutting sections down) Hand Level (for changing elevation/going down stairs)