Inspeed Display Kits

Inspeed Anemometer Display Kits  We use bicycle speedometers for our display kits - for a few reasons: They have dual, simultaneous displays: 1: The current, instantaneous live wind speed 2: Options for Max, Average, and other readings They are inexpensive They are high quality They are battery powered, with auto-on and auto-off features to make the battery last as long as possible They update quickly - at least once per second, higher at high speeds The wire can be made very long (hundreds of feet) with no effect on accuracy or performance ...to name a few.  The display kits include the following: The LCD display, calibrated to mph (can be calibrated to mph, kph, or knots - under certain conditions) The display mounting bracket, with high strength mushroom tape attached to the back Wires stripped and ready for attachment to the wind sensor, or, as an option, with a 1/8" jack connection for certain models An extra piece of self-adhesive mushroom tape to attach wherever you want to mount the display The display instructions (so you can access/set other functions if you want) We currently offer 2 models: The Cateye Velo7 - which is limited to 125 mph, and The Sigma Sport MC10  - which works up to 200 mph The display kits are available with bare wires or, optionally, a 1/8" jack connection (for use with the Inspeed Mag Mount or Flexwire anemometers). NOTE:  the display kits are designed for use with INSPEED REED SWITCH anemometers.  The Hall sensor anemometers require external power to work (not included). NOTE2:  take care when observing the Average Wind Speed; for cycling, the average speed calculations stop when the wind speed is below 1 mph, so the Average will be incorrect if there were periods of no wind.  There is a work-around - see the instructions!