InSoFast Batt-Brackets

Batt-Brackets™ Unlock new possibilities in exterior continuous insulation with Batt-Brackets™! Designed to use Batt Insulation as continuous exterior insulation, the Batt‑Bracket™ approach allows the use of Steel Stud Batts continuously, with brackets sized to fit standard batt thicknesses. Steel stud batts measure 16 ¼” or 24 ¼” wide, allowing complete coverage on the wall. The use of batt insulation used as exterior insulation is a much more cost-effective way to get the benefits of products like mineral wool board. A core advantage is zero thermal bridging: brackets are engineered to avoid conductive paths through the insulation, improving whole‑wall performance. When used one the exterior of the home, the ventilated rainscreen promotes drying through a vapor permeable WRB and reduces condensation risk—key benefits for long‑term durability and mold prevention in CEI applications. This increased drying potential mitigates the risk of water infiltration into the wall assembly and puts the batts in a much better drying condition than if the insulation was installed inside the wall cavity. The Batt‑Bracket™ family is pre‑engineered for high wind loads and extreme climates, with a rugged design that maintains performance in storm‑prone or high wind areas. Its rainscreen and ventilation features are integrated into both wall and roof applications to manage moisture from the base of the wall to the roof peak. Installation is straightforward: brackets fasten with common fasteners to wood, metal, or concrete, then batts are inserted into the brackets. The batts are then covered with a vapor-permeable WRB and furring strips are installed. To learn more about installing Batt-Brackets,™ please refer to the installation guide.  Batt-Brackets™ can be installed on exterior wall and roof applications. Box Coverage: Below are approximate box coverage. Coverage will vary, with simple homes having more coverage and more complex custom homes having less coverage. We recommend completing a detailed takeoff or use our Calculator. Framing Spacing (Horizontal) Bracket Spacing (Vertical) Aprox. Coverage 16″ 48″ 77 to 97 sf 24″ 48″ 116-136 sf   Attachment Methods: Wood framing: Brackets are attached to the framing with construction screws or ring-shank nails. Steel Framing: Brackets are attached to the framing with drill-tipped screws. Concrete: Brackets are attached with concrete screws. Please refer to the Installation Guide for more information.    Learn More About InSoFast Batt-Brackets! Shipping & Returns Click HERE for shipping details & return policy Order a Sample Sample Packs will be available soon. Downloads Details Manual  Installation Guide Batt-Bracket™ Brochure Technical Data Sheet Architectural Specs – CSI Masterformat