Infinity Tools Mini Power Feeder For Router Table & Shapers

Mini-Power Feeder Increases Safety & Quality of Cut At Router Table And Shaper Power feeders have been standard equipment in professional cabinet shops for decades because they improve finish quality and safety for tools like the shaper, tablesaw, and bandsaw. But full-size feeders are too large and expensive to be used on smaller machines like a router table, or in low volume applications like most home shops. The Infinity Mini Power Feeder solves those problems and puts professional results within reach. Weighing in at 26 Lb and with an optimum speed range, our mini feeder is a perfect addition to router tables, shapers, bandsaws, and many other tools that benefit from consistent feed rates and hands-free operation. Running on 110 volts the 1/8 hp constant output motor produces plenty of power to feed even the largest workpieces. The feeder itself is fully adjustable and can be positioned to feed workpieces either horizontally against the table of vertically against the fence. The feed direction is easily reversed with the flip of the switch. Take full control of your feed rate by setting the easy-to-read dial exactly where you need it. The three spring-loaded polyurethane rollers ensure consistent feeding even on irregular workpieces and they grip your stock securely without marring its surface. Mounting our mini power feeder to your Infinity Plycore Router Tabletop (RTT-002) is easy. Just use the standard pre-drilled mounting holes with threaded inserts to quickly put on and take off the power feeder, no need for adaptors or reaching under the table to install nuts and washers. Also installs to most other cast iron machine tables using the optional adapter bracket (MPF-ADP) or by drilling mounting holes with the included template. We also offer a set of 4 M10 threaded inserts (RTT-M10TI) that can be added to Plywood or MDF tables. These are the same Inserts that come standard in the Infinity Plycore Router Table Top (RTT-002) If you want the best results at your router table or shaper or you simply want to make your workshop safer and more enjoyable, the Infinity Mini Power Feeder is exactly what you have been looking for. Product features: 1/8 HP Motor 110 Volts 3 spring loaded polyurethane feed rollers Variable speed 6.5-56 fpm (2-17 m/min) Forward/reverse feed direction Horizontal and vertical feed orientation Lightweight 26Lb (12 Kg) Attaches quickly to Infinity Tools Plycore and Cast Iron router tabletops Attached to shapers with optional adapter bracket