Infinite Blade Re

**Rods are ineligible for standard international shipping rates- please contact us for a quote** Originally, 1-piece rods were the mainstream bass rods, and 2-piece rods were considered to have more negative elements than 1-piece rods. A one-piece rod that is simply divided, a seam that does not bend smoothly, and a rod that breaks more easily than a one-piece rod. Because it is a 2-piece rod made from separate mandrels on the front and back, it has strength and action. Turning Disadvantages into Advantages! A completely reversed idea! This is how the INFINITE BRADE Re bass rod, a completely new 2-piece specially designed bass rod, was born. Due to the manufacturing method, the front and rear tapers are separate, and the two-piece rod can combine different materials to create a smooth action and strong power and torque. If you try to realize the same action and power with one piece, it will be very complicated and lead to an increase in cost. Lineup: IBRS-63UL1L2 Versatile rod for all light rigs that combines UL power 1st piece and L power 2nd piece. The 1st piece, which has an extremely soft tubular tip that specializes in the operability of a lightweight rig, achieves outstanding operability and high sensitivity that makes it easy to feel the bottom and grasp the state of the rig. In addition, the taper design that changes from fast taper to regular fast depending on the load demonstrates high castability. Overturned the common sense of conventional light rig rods that are easy to operate but difficult to cast. In addition, the tough bat of the 2nd piece eliminates anxiety when landing. It is the ultimate ultra light action rod that can be realized because it is a 2-piece plug with a variable taper and a lightweight plug for down shots, cat rigs, no sinkers, etc. ■Materials used Carbon fiber 98% Glass fiber 2% ■Resin used Epoxy resin ■Total length 191cm ■ Finished dimensions 98.7cm ■Standard weight 83.4g ■Tip diameter 1.5mm ■Base diameter 8.8mm ■Number of joints 2 pieces   IBRS-67L1ML2 The definitive version of versatile spinning that flexibly responds to light rig long distance approaches, surface lures such as shads and i-shaped lures, and small hard baits. The 1st piece, which is designed to be a regular first taper that bends smoothly, combined with the long length of 6 feet 7 inches, makes it possible to cast light rigs and light hard baits long distances with ease. The strong and sharp 2nd piece breathes life into the lure without the rod shaking during action. Of course, compared to general light action versatile spinning rods, a far more robust bat promotes hooking power and torque during fighting. Versatile long spinning that could not be achieved with a one-piece rod. ■Materials used Carbon fiber 98% Glass fiber 2% ■Resin used Epoxy resin ■Total length 200cm ■Finished dimensions 103.7cm ■Standard weight 89.8g ■Tip diameter 1.6mm ■Base diameter 9.8mm ■Number of joints 2 pieces   IBRB-66ML1M2 A versatile rod with a regular first taper that makes use of the manufacturing method unique to a two-piece rod created from separate front and rear iron cores. The 1st piece of ML power realizes outstanding operability when warming up such as light texas and heavy down shots and technical plugging such as poppers and jerkbaits. The 2nd piece, which is refined with a different taper than the 1st piece, demonstrates a solid point of contact and power. Eliminates anxiety about hooking, which feels like a general bending versatile rod, especially when warming. Achieves firm hooking even when using lures with single hook thick shafts such as wire baits. Compatible with all lure rigs. It is a super versatile rod that has succeeded in achieving both operability and hanging place. ■Materials used Carbon fiber 98%, Glass fiber 2% ■Resin used Epoxy resin ■Total length 198cm ■ Finished dimensions 102.2cm ■Standard weight 111g ■Tip diameter 1.8mm ■Base diameter 11.2mm ■Number of joints 2 pieces   IBRB-610MH1H2 Taking advantage of the 2-piece manufacturing method, MH's jig & worm rod is added with strong H power. The 1st piece, which has a little flexibility, demonstrates high operability and versatility that is not specialized for bottom fishing. Outstanding sensitivity and operability are achieved not only when using jigs and worms, but also when fishing with no sinker rigs where it is difficult to feel the bottom. From wire baits such as chatter baits and spinner baits to horizontal fishing with structures such as swim jigs. The strong power of the 2nd piece makes it easy to handle applications that make you feel a little uneasy with conventional MH rods. Especially on land with high footing, its power often helps. High sensitivity, blur-free sharpness, and unsettling power. It is a versatile heavy rod that allows you to do things that were impossible with a stiff heavy rod. ■Materials used Carbon fiber 99% Glass fiber 1% ■Resin used Epoxy resin ■Total length 208cm ■ Finished dimensions 107.7cm ■Standard weight 129.8g ■Tip diameter 2.0mm ■Base diameter 11.6mm ■Number of joints 2 pieces   IBRB-70H1XH2 A power game rod that flexibly performs from heavy weight worming such as heavy Texas and punching to retrieve-oriented fishing such as big bait, swim bait, and Alabama rig. The 1st piece is set to H power, taking advantage of the 2-piece manufacturing method for the XH rod, which tends to be too strong overall. This makes it easy to put weights on when casting, and has succeeded in making it versatile enough to handle horizontal fishing. By intentionally setting it to 7 feet, it is easy to perform technical actions and operations such as big baits and swim baits. . It is the ultimate power game rod that can be created because it is a 2-piece for all heavy weight fishing. ■Materials used Carbon fiber 99% Glass fiber 1% ■Resin used Epoxy resin ■Total length 213cm ■ Finished dimensions 110.2cm ■Standard weight 143.8g ■Tip diameter 2.0mm ■Base diameter 12.5mm ■Number of joints 2 pieces