Industrial Linear Actuators

Description The FIRGELLI Industrial Linear Actuator is built for the toughest environments, delivering up to 2,200 lbs (10,000 N) of force with IP66 environmental protection. Featuring integrated limit switches and Hall-sensor feedback, this unit is engineered for rugged reliability in outdoor, agricultural, and industrial automation applications. For basic operation, simply use the standard 2-wire hookup — the actuator will stop automatically at each end of travel thanks to the built-in limit switches. The included Hall sensor wires are optional and allow for precise position monitoring if required. Download Brochure here Features and Benefits Massive Force Output: Capable of pushing/pulling up to 2,200 lbs (10,000 N). IP66 Rated: Dust-tight and resistant to powerful water jets, making it ideal for harsh outdoor conditions. High-Precision Feedback: Built-in Hall sensor (0.049mm per pulse) included on all units for optional synchronization or position control. Built-In Limit Switches: Internal non-adjustable switches automatically shut off the motor at full extension and retraction to protect equipment. Ball-Screw Drive: Provides higher efficiency, speed, and durability compared to standard lead screws. Wide Temperature Range: Operates reliably from -40°C to +65°C (-40°F to 150°F). Stroke Options: Available in increments from 10" to 40". Maintenance-Free: Sealed design requires no ongoing maintenance. Accessories: Compatible with MB-18 Brackets, Rocker Switches, and Remote Controls. *Wiring Note: Connect the two heavy-gauge wires to a DC power source (12V or 24V depending on model) to extend; reverse polarity to retract. The smaller gauge wires are for the Hall Sensor feedback (optional). Technical Details Spec Value Dynamic Force 2,200 lbs (10,000 N) Static Force 3,500 lbs (15,558 N) Input Voltage 12 VDC or 24 VDC Speed (No Load) 0.5" (13mm) per second Speed (Full Load) 0.29" (7.5mm) per second Gear Ratio 40:1 Duty Cycle 25% at full load (Higher duty cycle available at lower loads) IP Rating IP66 (Dust & Water Jet Resistant) Operating Temp -40°C to +65°C Feedback Hall Sensor (0.061mm per pulse) Mounting Holes 0.51" (13mm) diameter. Fits MB18 Brackets Wire Length 1.5m (Tinned bare wires) Overload Protection Built-in electrical overload protection Stroke & Dimensions Stroke Retracted (Hole-to-Hole) Extended (Hole-to-Hole) 10" 18" (457 mm) 28" (711 mm) 15" 25" (625 mm) 40" (1016 mm) 20" 30" (762 mm) 50" (1270 mm) 25" 37" (940 mm) 62" (1575 mm) 30" 42" (1067 mm) 72" (1829 mm) 35" 49" (1245 mm) 84" (2134 mm) 40" 54" (1372 mm) 94" (2388 mm) Speed and Current Draw Graphs Downloads / Drawings Downloads / Drawings 3D Models (STEP Files) 12V Models 10" Stroke (12V) 15" Stroke (12V) 20" Stroke (12V) 25" Stroke (12V) 30" Stroke (12V) 35" Stroke (12V) 40" Stroke (12V) 24V Models 10" Stroke (24V) 15" Stroke (24V) 20" Stroke (24V) 25" Stroke (24V) 30" Stroke (24V) 35" Stroke (24V) 40" Stroke (24V) Technical Drawings (PDF) 10 Inch Stroke 12V PDF | 24V PDF 15 Inch Stroke 12V PDF | 24V PDF 20 Inch Stroke 12V PDF | 24V PDF 25 Inch Stroke 12V PDF | 24V PDF 30 Inch Stroke 12V PDF | 24V PDF 35 Inch Stroke 12V PDF | 24V PDF 40 Inch Stroke 12V PDF | 24V PDF Videos and Articles Videos Related blog articles: Actuators - What is an Actuator? Control Actuators with Arduino Dimensions Stroke (in) Retracted Length Extended Length 10" 18" (457 mm) 28" (711 mm) 15" 25" (625 mm) 40" (1016 mm) 20" 30" (762 mm) 50" (1270 mm) 25" 37" (940 mm) 62" (1575 mm) 30" 42" (1067 mm) 72" (1829 mm) 35" 49" (1245 mm) 84" (2134 mm) 40" 54" (1372 mm) 94" (2388 mm) FAQ Do you have a bulk discount Yes, we do. Our discount structure is based on volumes, starting at 11pcs or more. Do you provide a warranty? All actuators come with a 12-month manufacturer warranty. Optional Warranty Plus is available. What is your return policy? Returns are accepted within 30 days for new/unused items. 20% restocking fee applies unless replaced. Email sales@firgelliauto.com for RMA.