In My Easter Era Bunny Easter DTF TRANSFER or UV DTF STICKER or UV DTF STICKER

UV DTF Stickers are amazing to elevate your business or for personal use. UV DTF Stickers are a 3D sticker with a gloss varnish finish that can be applied to a hard surface. UV DTF Sticker Decals Application Instruction 1. Clean the Cup or hard surface for glass items wash and dry the glass cup thoroughly. 2. Rub or Squeegee the backing of the UV Sticker  3. Peel off backing with design on the clear carrier film 4. Place the transfer on the cup/hard surface ensuring design is straight and positioned correctly. 5.  Rub / Squeegee  the UV DTF Sticker up, down and from side to side to remove any air bubbles to ensure a good adhesion.  6. Peel carrier film off slowly from to corner and diagonal across, if you notice the UV dtf sticker not adhering lay the carrier film back and a squeegee again. 7. ENJOY you're all done! DTF TRANSFER or UV DTF STICKER Yay! You're purchasing a DTF Transfer DTF Transfersare full color Yes including white! They can be pressed on any type of fabric, have a great feel and hold up wash after wash. DTF Transfers are printed with a white layer on the back so the transfer can be applied on various colors. Pressing Recommendations: Press 315-325 Degrees for 12 seconds withHEAVYpressure. BE SURE TO CONFIRM TEMP WITH TEMP GUN Wait 5 seconds then peel HOT, make sure to peel from the most solid corner of the design Apply a piece of parchment or teflon sheet and press for 5 Seconds ** IF YOUR TRANSFER IS NOT ADHERING TO THE SHIRT BE SURE TO CONFIRM YOUR TEMP AND INCREASE YOUR PRESSURE