Image Lock - Ready for Use DTG Pretreat Solution

Get Great Results With Image Lock - Ready for Use DTG Pretreat Solution Image Lock Ready for Use pretreatment solution is preferred by industry leaders for its minimal staining, soft hand feel, great wash fastness, and fabulous color brilliance for all direct-to-garment printers. Best used as an Epson pretreat solution. Image Lock RFU DTG printing pretreat solution can be applied with any automatic spray pre-treatment machine, like the Lawson Zoom-AE, or can be applied by hand with a Wagner spray gun, mist sprayer, pump sprayer, airbrush or garden sprayer, etc. Important Application Directions: Spray an even coat of Image Lock DTG pretreat fluid spray in the print location. DO NOT over saturate the garment. Allow Image Lock RFU to dry, either with a specialized conveyor dryer, like the Lawson Digi-Dry Box, Digi-Star or Blazer Textile Dryer, or by using a heat transfer press. Curing: When using a heat transfer press to dry, DO NOT use a Teflon sheet or silicone treated parchment paper to protect the garment, and DO NOT clamp the heat transfer press too tight at first. Simply lower the press to set on top of the garment and use plain parchment paper (or non-silicone treated parchment) as a protective sheet. Press the garment for 10 seconds at 330°F. Remove the pre-treatment paper and then press for an additional 10 - 15 seconds with heavy pressure. Using too much may leave a DTG Pretreatment stain on the garment and will cause the image to flake and peel during wash tests. Lighter garment colors require less pre-treatment than darker colors like black or navy. Garments can be pre-treated in advance in batches before final printing. You should test your curing methods prior to product. What we describe is only a suggestion. Curing A Finished DTG Print: Fully printed shirts must be heat cured at 330°F (165°C) for at least 90 to 180 seconds (depending on the shirt color) with a heat transfer press, using medium to heavy pressure with silicone treated parchment paper cover; heat transfer paper; or for glossy prints, a Teflon sheet. You should test your curing methods prior to product. What we describe is only a suggestion. Warning: Pretreatment solution is designed with DTG pretreatment solution ingredients to have a chemical reaction with the White ink. It is VERY IMPORTANT that the print head does NOT touch a pre-treated garment, or this chemical reaction can take place in the print head and permanently clog it. Always check the print head and garment clearance before printing. Storage: Keep tightly capped in a cool, 50-100°F (19-38°C) area. Wash-ability: Wash garments inside out in cold water using a delicate setting on dryer.