IGEBA CF-1 Car Fogging System

Disinfect and deodorize vehicle interiors quickly with the new IGEBA CF-1 Car Fogger. Easy handling and short application time at the lowest application rate. The CF-1 uses the air pressure of an available compressor and a special nozzle technology producing a dry and ultra fine fog to acheive a fast and comprehensive treatment of all vehicle spaces. For disinfection and odor control in all types of vehicles. Perfect for: Vehicle Dealerships Airplanes Taxi Companies EMS & Fire Service Police Departments Vehicle Rental Companies Public Transportation School Buses Auto Auction Facilities  IGEBA CF-1 Car Specifications Unit Weight (lbs/kg): 6.5/2.9 Dimensions (LxWxH) Inches: 11 x 10 x10 Dimensions (LxWXH) MM: 273 x 250 x 260 Solution Tank Capacity: 0.13 GAL/0.5L Dosage Nozzle Size: 0.02 Inches/0.6 mm Air Requirement at 44 psi/3 bar: 22 gpm Operating Pressure: 15-90 psi Included in box: CF-1 Car Fogger Large Funnel Screwdriver Owners Manual Tips for Successful fogging and disinfection of vehicles When treating passenger compartments, attach the unit to the slightly opended side window. Lower the side window a bit, hang the device with the retaining lugs on the upper edge of the window. Carefully move the side window up until the upper rubber bumper touches the door frame. The side window should only be slightly open. Although there are rubber buffers installed on the contact surfaces. To prevent scratches on the side window, we recommend to place a soft cloth over the edge and the outer surface of the side window. Nobody is allowed to stand or sit on the outlet side of the spray nozzle during fogging. There is danger caused by the escaping air flow, active agent and particles. Keep the original packing in case of warranty or service claims. The original packing ensures a save transport of the unit if it needs to sent in for maintenance or repair. The fogger consists of the main components frame with ON/OFF valve, solution line, air duct and spray nozzle. The device is connected to the customer’s compressed air supply with pressure reducer. When the unit is running, compressed air escapes the spray nozzle at high velocity, resulting negative pressure inside the solution line draws solution from the solution tank. Air and solution are mixed at the spray nozzle, solution escapes the spray nozzle as fog.