IC Unicorn White - 5 Gallon

IC-UNICORN SHIPPING NOTE: Shipping companies are charging additional fees for oversize items. If purchasing a 5 gallon an additional $15.00 flat fee will be added per 5 gallon. If you choose to pick up / will call the order at one of our locations, we will remove the fee before processing your order. FEATURES • FlexCure ™ - Flexible Curing from a low 275°F/135°C to 325°F/163°C • Very Creamy, Easy to Print - For ease of use, and ease of print • Phenomenal Coverage - Very opaque • Ultra-Low Bleed Technology - Combats dye migration Unicorn White™ is a mythical ultra low bleed, high pigment, fast flashing, low non-phthalate plastisol screen printing ink formulated to help block dye migration problems on various problem polyester content fabrics, delivering reliable results.   Unicorn White™ has a very creamy viscosity and is very easy to print. As a result, less pressure is needed to print to clear the screen compared to other poly whites.   Unicorn White™ is part of our FlexCure™ line of products. FlexCure™ inks can be cured at temperatures ranging from a low 275°F (135°C) to the ‘standard’ 325°F (163°C). SPOT FLASHING Unicorn White™ will spot dry, with a very low after flash tack. Dwell time is dependent on the spot dryer used. In some cases, you may have to lower the heat of the spot cure unit because too much heat may actually make the ink tacky. When you spot dry, you are only partially fusing or gelling the surface of the ink. The ink should be just dry to the touch, with no lift off, but not totally fused. Totally fusing the underprint may cause inter-coat adhesion problems with the inks printed on top. Final fusing or curing should occur in the dryer. IMPORTANT INFORMATION Unicorn White™ is an ultra low bleed ink, not a non-bleed ink. On some types of fabric, bleeding or dye migration may occur. Always test print the fabric to be printed before beginning production. It is best to do some long term testing on fabrics to determine if they are going to bleed. Bleeding or dye migration may not occur right away.   Adding any reducers or additives can lower the bleed resistance, opacity, or increase cure times of ink. STIR the ink prior to printing on press and after addition of reducers or additives.   Excessive squeegee pressure, when using Unicorn White™, will drive the ink through the fabric, making the ink look less opaque. Again, adding too much reducer will also cause loss of opacity.   For best results and to help mitigate bleed, cure at lower temperatures. We have found great results while curing at 275ºF (135ºC).   Test dryer temperatures and wash test printed product before and during a production run.   Ghosting, or fabric discoloration may occur when using this product on some 100% cotton fabrics. Always test for ghosting, dye or pigment migration or bleeding on any 100% cotton fabric before beginning production. Click here for more about ghosting. STORAGE OF INK CONTAINERS 65º to 90ºF (18ºC to 32ºC) Avoid storage in direct sunlight. Keep containers well sealed Feel free to live chat with us if you have any questions.