IC 717 Ultimate Black OG FlexCure - 1 Gallon

IC-717 Ultimate Black™ is a non-phthalate, high pigment, fast flashing, low tack, high performance plastisol screen printing ink. SHIPPING NOTE: Shipping companies are charging additional fees for oversize items. If purchasing a 5 gallon an additional $15.00 flat fee will be added per 5 gallon. If you choose to pick up / will call the order at one of our locations, we will remove the fee before processing your order. FEATURES 717 Ultimate Black™ provides a deep black color that is very creamy, short bodied and is easy to print on automatic or manual presses. 717 Ultimate Black™ achieves excellent penetration into fabrics when printing through fine mesh counts. SPOT FLASHING 717 Ultimate Black™ will spot dry, with a very low after flash tack. Dwell time is dependent on the spot dryer used. In some cases, you may have to lower the heat of the spot cure unit because too much heat may actually make the ink tacky. When you spot dry, you are only partially fusing or gelling the surface of the ink. The ink should be just dry to the touch, with no lift-off, but not totally fused. Final fusing or curing should occur in the dryer IMPORTANT INFORMATION 717 Ultimate Black™ was formulated to make printing opaque black easy, so hand printing is less tiring. The result is improved operator performance. Automatic equipment can be adjusted to lower pressure settings, thus improving screen life and squeegee durability. RECOMMENDED FABRICS 100% Cotton 50/50 Cotton/Polyester Blends Some Polyesters SCREEN MESH 60-230 t/in (24-90 t/cm) monofilament SQUEEGEE 60-70 Durometer Sharp edge Cure Temperatures 275ºF-325ºF (135ºC-163ºC) entire ink film STORAGE OF INK CONTAINERS 65º to 90ºF (18ºC to 32ºC) Avoid storage in direct sunlight. Keep containers well sealed Technical Data Sheet Product Declaration Sheet Feel free to live chat with us if you have any questions.