IC 7014 Legacy White 2.0 FlexCure - 1 Gallon

IC-7014 2.0 SHIPPING NOTE: Shipping companies are charging additional fees for oversize items. If purchasing a 5 gallon an additional $15.00 flat fee will be added per 5 gallon. If you choose to pick up / will call the order at one of our locations, we will remove the fee before processing your order. FEATURES Legacy White™ 2.0 is an excellent low bleed, high pigment, fast flashing, low tack, non-phthalate plastisol screen printing ink. Legacy White™ 2.0 has a super creamy viscosity and medium body, making the ink suitable for both auto and manual presses. Legacy White™ 2.0 offers superior performance through fast production speeds, exceptional brightness, excellent opacity, and low-sheen finish. Legacy White™ 2.0 is now part of our FlexCure™ line, which means it can be cured across a range of temperatures. For Legacy White™ 2.0, that range is 300°F to 325°F (149°C to 163°C). Legacy White™ 2.0’s low-cure, low-bleed properties help stem dye migration on cotton/poly blends as well as on most polyester substrates. SPOT FLASHING Legacy White™ 2.0 will spot dry, with a very low after flash tack. Dwell time depends on the spot dryer used. In some cases, you may have to lower the heat of the spot cure unit because too much heat may make the ink tacky. When you spot dry, you are only partially fusing or gelling the surface of the ink. The ink should just dry to the touch, with no lift off, but not totally fused. Totally fusing the underprint white may cause inter-coat adhesion problems with the inks printed on top of the white ink. Final fusing or curing occurs in the dryer. IMPORTANT INFORMATION 7014 Legacy White™ is a low bleed ink, not a non-bleed ink. On some types of fabric, bleeding or dye migration may occur. Always test-print the fabric to be printed before beginning production. It is best to do some long term testing on fabrics to determine if they are going to bleed. Bleeding or dye migration may not occur right away. Legacy White™ 2.0 was formulated to make printing opaque white easy. Hand printing is less tiring because less squeegee pressure is needed. The result is an improved operator performance due to superior ink rheology. Automatic equipment can be adjusted to lower pressure settings, thus improving screen life, squeegee durability and overall print quality. Legacy White™ 2.0, compared to other opaque whites, prints more easily. You will find that a finer screen mesh can be used to achieve the same opacity as a more open mesh. This means less ink will be needed, a real money saver in terms of ink usage. It also means a softer hand on flashed or finished fabrics.  Adding any reducers or additives can lower bleed resistance, reduce opacity, or increase cure times of the ink. STIR the ink prior to printing on press and after addition of reducers or additives. Test dryer temperatures and wash test printed product before and during a production run. RECOMMENDED FABRICS 100% Cotton 50/50 Cotton/Polyester Blends Some Polyesters SCREEN MESH 60-230 t/in (24-90 t/ cm monofilament SQUEEGEE 65-75 Durometer Sharp edge STORAGE OF INK CONTAINERS 65º to 90ºF (18ºC to 32ºC) Avoid storage in direct sunlight. Keep containers well sealed Technical Data Sheet Product Declaration Sheet Feel free to live chat with us if you have any questions.