Associated IBC6008MSK Intellamatic 12V 60/270A Boost Wheel Automotive Battery Charger with Memory Saver

Associated IBC6008MSK Intellamatic 12 Volt - 60 Amp / 270 Amp Boost Wheel Automotive Battery Charger and 70 Amp Power Supply with 15 Amp Memory Saver Port   Includes 12 ft Memory Saver Cable and Terminal Covers   The IBC6008MSK provides safe effective charging at 12 Volt for Flooded / Maintenance Free, AGM, Gel Cell, and Deep-Cycle Batteries, as well as Spiral Cell, Orbital or Optima EFB & Lithium Deep Cycle Batteries. The Electrical Stability System (ESS) technology turns the IBC6008MSK into a stable power supply for extended service procedures or re-flashes while the battery is removed - maintaining a nominal 13.7V DC Output via the OBDII Port on your vehicle.   - 60A Adjustable Charging Voltage and Amperage - 70A Adjustable Voltage Reflash Power Supply - 20A Memory Saver Port and 12 ft OBD-II Cable for Memory Saving - Polarity Indicated and Polarity Protected with Audible Alarm - Partial Charge Mode and Patented Battery Diagnostics - Designed to Vehicle Manufacturer and Battery Manufacturer Requirements - Charges all 12V Battery Types - 12 Volt Standard Flooded, AGM, Gel, EFB, Lithium and Deep Cycle batteries - "Safe in Any Weather" - MADE IN USA Advanced Features  The IBC6008MSK has several advanced features, making this a versatile charger which can replace virtually all other chargers.   Reflash Power: Used to hold the voltage on the battery at the set value while the vehicle is being serviced. Memory Saver: Used with the Memory Saver option to hold up the vehicle voltage while charging the battery. Crank: Used to assist starting a vehicle. Manual: This mode can be used to operate the charger just like a manual charger runs for the time set while limiting the current and voltage. The IBC6008MSK charger has several other parameters for set-up and use for a very accurate or specific charge.   Parameter Lock: Used to lock all the settings for the various battery types. Volts At Bat - Voltage Drop: this is used to calibrate cable/clamp voltage drop. Jump Con MOhms: Used to determine voltage drop for line drop calculations. Manual Test: Used to test the unit in production. Amp Output: Used to calibrate the current reading. Maximum Current: Limits current out put of the charger. Can be used to limit heating of the battery. Some batteries have limits on maximum current for charging. Hold Voltage: Depending on the battery type this could be the maximum voltage the battery is charged at or it may be gassing point where the current is reduced to charge the battery for maximum charge efficiency. Run Time: This would be the maximum charge time allowed for charging the battery. Safety Voltage: If this voltage is reached and cannot be reduced charge is terminated. Finish Current: Depending on the battery type, this current is the current the charge is terminated on or the current used to finish the charge. Time Post Gassing: This is the maximum time allowed after reaching the hold voltage. Specifications Model Number: IBC6008MSK Battery Types: 12 Volt Standard Flooded, AGM, Gel, EFB, Lithium and Deep Cycle batteries Display: Four-line backlit digital display with 3 languages: English, Spanish, and French DC Leads: 6.5 ft, 4 AWG Clamp Rating: 500A AC Cord: 6 ft, 16-3 AC Input: 12A 120VAC 60 Hz Charger Output: 13.8V - 60A,  Crank 7.2V - 260A Power Supply Output: 13.8V - 60A. Can output 70A at lower voltage for <10 min. Memory Saver Port: 20A Memory Saver Cord: 12 ft, MS6209-12 OBDII Industry Approvals: UL/CUL Limited Warranty: 2 Years Parts & Labor, 3 Years Transformer/Rectifier Country of Origin: MADE IN USA of US and Global Components UPC: 099684006989 Shipping Dimensions: 17.25" x 16.5" x 26.5" Weight: 49 LBS   Information Downloads Operator Manual Product Bulletin Spec Sheet Video Review