HYPERDRIVE | Module

Introducing the all-new HYPERDRIVE Module, the ultimate plug-n-play brushless gearmotor solution! This compact and powerful motor + VESC combo is paired with a custom gearbox and 3/4" hardened 4130 steel output shaft, making it perfect for drivetrain or weapon applications. And the best part? It comes fully assembled, wired, and programmed, so all you have to do is add power and a PPM signal and you're ready to go! Choose between High Torque (3.67:1) or High Speed (1:1) gearing options to match your specific design needs. Don't miss out on the most advanced OTS motor solution on the market - Pick your gearing to best match your design! Download 3D STEP Model   HYPERDRIVE Module Specs Gear Ratio 3.67:1 (18T:66T), 1:1 (42T:42T) Gearbox Material 6061-T6 Aluminum, Gold Anodized Gear & Output Shaft Materials 4130 Chromoly Steel, Hardened 40HRC Dimensions w/o Rear Motor Support Kit (L x W x H, in) 4.513" x 4.688" x 3" Dimensions w Rear Motor Support Kit (L x W x H, in) 4.654" x 5.237" x 3" Shaft Dimensions (Diameter x Length, in) 3/4" OD x 2.5" L, 3/16" Keyway Mass w/o Rear Motor Support Kit (g, lbs) 2,163 grams (4.77 lbs) Mass w/ Rear Motor Support Kit (g, lbs) 2,915 grams (6.43 lbs) Recommended Voltage (VDC) 16S Lipo (59.2V Nom, 67.2V Peak)   HYPERDRIVE Gearbox Specs Gear Ratio 3.67:1 (18T:66T), 1:1 (42T:42T) Gearbox Material 6061-T6 Aluminum, Gold Anodized Gear & Output Shaft Materials 4130 Chromoly Steel, Hardened 40HRC Input Pinion Shaft Requirements (mm) 10mm OD x 30mm L, D-Shaft Dimensions (Length x Width x Height, in) 4.181" x 1.952" x 3" Shaft Dimensions (Diameter x Length, in) 3/4" OD x 2.5" L, 3/16" Keyway Mass (g, lbs) 1,148 grams (2.53 lbs)     HYPERDRIVE Motor Specs RPM/Volt (KV) 110KV Max Voltage (V) 75VDC peak (6-18S LiPo) Continuous Current (A) 70A Max Current (A) 100A Max Continuous Power (W) 4200W Torque Constant (KT) 12.3 oz-in/A (.087 N-m/A) Max Torque (oz-in, N-m)  1345.3 oz-in (9.5 N-m) Internal Resistance (Ohm) 0.055Ω (.055mΩ) Motor Structure 12N/14P Motor Dimensions (Diameter x Length, mm) 70mm OD x 70mm L Shaft Dimensions (Diameter x Length, mm) 10mm OD x 30mm L, D-Shaft Mass (g, lbs) 1,008 grams (2.22 lbs) Bullet Connector Size 4mm Sensors Yes, Hall Effect + Thermistor   HYPERDRIVE VESC Specs Voltage Range (V) 14-84VDC (4-20S LiPo) Continuous Current (A) 100A Max Current (A) 120A BEC  5VDC @ 1.5A Max ERPM 150,000 USB Communication Type USB-C Supported Sensor Types ABI, Hall, AS5x47, AS5x48 Supported Input Types PPM, ADC, NRF, UART Wire Size (AWG) 12 AWG Size (Length x Width x Height, mm) 103mm x 58mm x 5.9-18.5mm Mass (g, lbs) 225 grams (0.5 lbs) Connector Types 4mm Bullets (Phase), XT90 (Power)   WARNING: This VESC does NOT have Phase Filters! Please turn OFF the phase filter function and choose "false" in VESC Tool when using firmware version on or above 5.3 (VESC_TOOL 3.01). Failing to turn off the phase filter will result in VESC damage. DO NOT restore the default parameters when using the wizard interface.