Hydro Ban Adhesive & Sealant 20 oz Sausage Pack

Laticrete Adhesive Sealant 20 oz. Sausage Pack Fast curing, hybrid elastomeric adhesive and sealant from Laticrete International meets all requirements in today's green building standards while still holding that strong adhesion for a wide variety of substrates like all HYDRO BAN products and accessories Features Excellent adhesion on nearly all substrates, including polystyrene Fast curing Excellent durability Superior flexibility Will not shrink or crack No harmful components are used VOC compliant Allow for flood testing in 2 hours at 70 degrees or higher and 50% RH Uses Holds backer-board to HYDRO BAN pre-slopped shower pans Fasten niches to wall studs and backboard Adhesive sets in place all cover seams, coves, corners, screws, and tab washer penetrations with full coverage Coverage Coverage will vary depending on joint size and width Approximately 25 linear feet (7.62 m) per tube at 1/4" x 1/4" (6 x 6 mm) joint width Approximately 49 linear feet (14.9 m) per sausage pack at 1/4" x 1/4" (6 x 6 mm) joint width Laticrete Hydro Ban Adhesive and Sealant Application Temperature Range 35°F - 80°F (2°C - 27°C) Open Time 20-30 minutes Set Time 2 hours Full Cure 40 hours Clean Up Soapy water Mildew Resistance Good Dimensions 36 in x 29 in x 20 in Common Questions What is Laticrete Hydro Ban Adhesive & Sealant HYDRO BAN Adhesive & Sealant is a one-component, fast-curing hybrid elastomeric adhesive and sealant. It is specifically formulated to meet today's Green Building Standards and has excellent adhesion on a wide variety of substrates.