Hybrid Racing Replacement Intake Air Filter

Dry Air Filter, Does Not Require Oiling Cleanable, Can Be Reused Fits All Hybrid Racing Air Intakes Air Filter and Clamp Included Description Vehicle Fitment Included Hybrid Racing Replacement Intake Air Filter (HYB-AFR-01-03) Filters wear out. They collect dirt, they eventually clog, and on a performance intake a tired filter quietly costs you the airflow you paid for. This is Hybrid Racing's replacement, using the redesigned open-top element from the Formula intake, dry cotton gauze that never needs oiling, and it fits across the whole Hybrid Racing intake and velocity stack lineup. Best of all, it means replacing just the filter rather than a whole assembly. The Open-Top Design Flows More This is the redesigned filter, and the open top is the improvement. Most cone filters are closed at the end, drawing air only through the sides. This one opens the top face as well, which gives the engine another surface to pull through. More open area means more airflow and less restriction, which is exactly what you want feeding a built engine. It's the same element Hybrid Racing developed for the Formula intake, so it's not a generic replacement, it's the current design that flows better than what came before. Dry Filter, No Oiling Cotton gauze construction, and critically, it's a dry element. That matters more than it sounds. Oiled filters need re-oiling after every cleaning, and over-oiling is a genuine problem, since excess oil migrates onto your MAF sensor and fouls it, which throws off your fueling and can trip a code. It's one of the most common ways people create problems with an aftermarket intake. A dry filter sidesteps all of that. When it's dirty, you clean it and reinstall it. No oil to apply, no risk of over-oiling, no MAF sensor to worry about. It's cleaner to live with and harder to get wrong. Replace The Filter, Not The Whole Stack This is the practical reason the part exists, and it saves you real money. On some setups, a worn filter meant replacing the entire velocity stack assembly because the filter wasn't a separate serviceable piece. That's an expensive way to do routine maintenance. This filter is designed to make replacement easy. When yours is past cleaning or you want a fresh one, you swap the filter alone rather than buying a whole new velocity stack. On a wear item, that's the difference between a maintenance cost and a component cost. Fits The Whole Hybrid Racing Lineup One filter covers the range, which keeps things simple. Air intakes: HYB-CAI-01-02, HYB-CAI-01-10, HYB-CAI-01-14, HYB-CAI-01-25, and HYB-CAI-01-26. Velocity stack filters: HYB-VSF-01-02 and HYB-VSF-01-04. Whether you're running a Hybrid Racing cold air intake or a velocity stack setup, this is the replacement filter. No need to work out which specific element your intake takes. When To Replace It A filter is a wear item, so it's worth knowing when yours is due. Typically, air filters are good for 15,000-45,000 miles. If it's visibly dirty, clogged with debris, or you simply can't remember the last time you serviced it, it's time. A restricted filter chokes the intake you spent money on, so keeping a fresh one in is how you make sure the setup keeps flowing the way it did new. Clean it when it's dirty, replace it when cleaning no longer brings it back. Specifications Part number: HYB-AFR-01-03 Inlet opening: 6.5" OD, 6.0" ID Construction: dry cotton gauze Design: open-top for increased airflow Fitment Hybrid Racing air intakes: HYB-CAI-01-02, HYB-CAI-01-10, HYB-CAI-01-14, HYB-CAI-01-25, HYB-CAI-01-26 Hybrid Racing velocity stack filters: HYB-VSF-01-02, HYB-VSF-01-04 Who Should Grab One This is for the Hybrid Racing intake owner whose filter has seen enough miles, and for anyone who wants a spare on the shelf. Open-top design for more flow, dry gauze that never needs oiling, and a filter you can replace on its own rather than buying a whole stack. Swap it in and keep the intake breathing the way it should. Fits: Hybrid Racing air intakes (HYB-CAI-01-02, -10, -14, -25, -26) and velocity stack filters (HYB-VSF-01-02, -04). Part number: HYB-AFR-01-03. Opening: 6.5" OD, 6.0" ID. Design: open-top for increased airflow, as used on the Formula intake. Construction: dry cotton gauze, no oiling required. Serviceable: replaces the filter alone, no need to replace the velocity stack. Universal (1) Replacement Intake Air Filter