Husqvarna DM 220 Core Drill

Husqvarna DM 220 Concrete Core Drill Husqvarna Core Drill is an easy-to-handle core drill that can be used both wet and dry when drilling through concrete floors and walls. The DM 220 has a handle that can accept a water feed system through the spindle for wet drilling and a vacuum port attachment for dust-free dry drilling. Features Ergonomic handle design for increased comfort while drilling downwards into floors and will also work for drilling walls The front handle can be turned 360 degrees, which is useful when drilling in cramped areas LED indicator shows when the machine is in a vertical or horizontal position Equipped with a leveling guide system that ensures the operator is at a level position while drilling to increase precision and drilling efficiency It uses Elgard pulsation to indicate when the machine is overloaded and will shut off the motor if the load isn't reduced to extend product life When making a starter hole, speed can be reduced by half using SmartStart Built-in SoftStart electronic current limiter means full speed is reached about two seconds after start It can be mounted onto a DS 250 Core Drill Stand and can drill up to a 6" core bit while mounted GFCI equipped on plug What's Included? Husqvarna DM 220 Hand Held Core Drill Vacuum Port Attachment Water Connector Wrench Carrying Case Operator's Manual Husqvarna DM 220 Specifications Motor Single Phase, Electric Power 2.3 hp/ 1,700 W/ 15 amps Voltage 110V No Load RPM 3-speed 900, 2,150, 4,500 Full Load RPM 3-speed 500, 1,400, 2,900 Bit Capacity 4" (hand-held) 6" (mounted on stand) Connection 1-1/4"-7 thread Weight 15.4 lbs